AnotherScott Posted February 11, 2017 Share Posted February 11, 2017 I kinda wish I wasn't the only one on the forum that has heard both units. To that end, if anyone from the area wants to bring an original v3 over to A/B, I'd be glad to do that. I hope someone takes you up on that, I'm really curious! I ended up returning my 1st run v3, largely because of the weight, and also because I didn't like the acoustic piano sound unless it ran it through my home board that allowed me to tweak it with a sweepable mid, a functionality I didn't have in my live rig. Now it's lighter, and I also happen to have acquired a much smaller mixer with a sweepable mid, so I've been thinking about giving it another go. Hmmm. Quote Maybe this is the best place for a shameless plug! Our now not-so-new new video at https://youtu.be/3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out! And hopefully I'll have something new here this year. ;-) Link to comment Share on other sites More sharing options...
Dave Bryce Posted February 11, 2017 Share Posted February 11, 2017 ... I got a new keyboard stand, and had to set the system up to try it before gigging last night ... dB http://i5.photobucket.com/albums/y172/davebryce/IMG_5115_zpscmuxpwcz.jpg Are you talking the amp stand or keyboard stand? I'm curious about your keyboard stand - What is that make/model? Review? Weight? Setup time? portability? it looks way cool from the part that isnt hidden under your keys Yes, I'm talking about the keyboard stand. It's a Brazilian company called Stay. Easy setup, excellent portability - really light weight....but this thread isn't the place to talk about that. Will post a review of that elsewhere in the forum. dB Quote ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
Doerfler Posted February 12, 2017 Share Posted February 12, 2017 According to Aspen's post a few pages back, the new one is 32 lbs, down from 39 in recent runs (which itself was a little lighter than the first run). Yeah, my other one was first run. The new one feels waaaay lighter. dB just put mine on a digital scale as I was curious and it registered as 37.7. It's a new scale and it is accurate. That being said, for my purposes, losing 6 pounds wouldn't justify any costs (including time) incurred with selling this one and buying a new one. Quote Link to comment Share on other sites More sharing options...
cphollis Posted February 12, 2017 Share Posted February 12, 2017 Heads up to all Nord AP players and SSv3 owners. Check out the new Studio Grand 3D sample. I spent all afternoon A/B-ing in my studio, and it sounds 20% better than any other piano sample on the SSv3. It makes sense to me. The SSv3 sends X+Y out the front, X-Y out the side. Well, there's not a lot of X-Y with most Nord piano samples unless you process them with chorus, reverb, other voices, etc. This sample has tons of X-Y content, so it sits in the stereo field so much nicer than any of my other piano samples. Worth trying out for yourself. Quote Want to make your band better? Check out "A Guide To Starting (Or Improving!) Your Own Local Band" Link to comment Share on other sites More sharing options...
Brad Kaenel Posted February 12, 2017 Share Posted February 12, 2017 Check out the new Studio Grand 3D sample. Did you mean the Royal Grand 3D? http://www.nordkeyboards.com/sound-libraries/nord-piano-library/grand-pianos/royal-grand-3d Quote Legend '70s Compact, Jupiter-Xm, Studiologic Numa X 73 Link to comment Share on other sites More sharing options...
cphollis Posted February 13, 2017 Share Posted February 13, 2017 Sorry, yep, that's the one. My bad. Getting old and forgetful. Anyway, played a gig with it tonight. Sounded so much better than my other Nord piano samples, it wasn't fair. Sat well in the mix, fuller stereo effect, the other musos commented, etc. I think I've found my newest go-to AP when using the SSv3. It was like getting an upgraded amp. It's that good, at least to my ears. Anyone else? Quote Want to make your band better? Check out "A Guide To Starting (Or Improving!) Your Own Local Band" Link to comment Share on other sites More sharing options...
trebleclef Posted February 13, 2017 Share Posted February 13, 2017 My original v3 was from the run where the jacks on the back panel aren't sealed so I always had to stick a 1/4" plug in the "sub" out to keep the amp from farting when it got hit hard with bass notes... Dave, can you explain this a little more? I thought I head read this entire thread, but don't remember seeing anything about this, and I have that problem with the low end "farting" when the volume is pretty loud. What is this plug you're using, and how does it help? Thanks, -Mike Quote Link to comment Share on other sites More sharing options...
Dave Bryce Posted February 13, 2017 Share Posted February 13, 2017 My original v3 was from the run where the jacks on the back panel aren't sealed so I always had to stick a 1/4" plug in the "sub" out to keep the amp from farting when it got hit hard with bass notes... Dave, can you explain this a little more? I thought I head read this entire thread, but don't remember seeing anything about this, and I have that problem with the low end "farting" when the volume is pretty loud. What is this plug you're using, and how does it help? It's actually a really simple fix. The jacks on the back plate aren't sealed...so if there's nothing plugged into the Sub out, some of the air generated from the amp working will escape from the port, making that farting sound. If you use the Sub out, you probably won't encounter it. Easy to remedy - just cut a 1/4" jack off the end of a broken cord and stick it in the sub out...or just plug one end of an unused cable in there. dB Quote ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
AnotherScott Posted February 13, 2017 Share Posted February 13, 2017 Easy to remedy - just cut a 1/4" jack off the end of a broken cord and stick it in the sub out...or just plug one end of an unused cable in there. or if you don't have a broken cord or want something that won't dangle, a 1/4" adapter plug (i.e. RCA-to-1/4" , mini-to-1/4") Quote Maybe this is the best place for a shameless plug! Our now not-so-new new video at https://youtu.be/3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out! And hopefully I'll have something new here this year. ;-) Link to comment Share on other sites More sharing options...
Karl Sutton Posted February 13, 2017 Share Posted February 13, 2017 I tried the Nord 3D piano on regular wedge monitors - awful! But it does sound amazing in headphones! Quote Yamaha P22 Upright / Nord Stage 2 SW73 Link to comment Share on other sites More sharing options...
trebleclef Posted February 14, 2017 Share Posted February 14, 2017 Easy to remedy - just cut a 1/4" jack off the end of a broken cord and stick it in the sub out...or just plug one end of an unused cable in there. or if you don't have a broken cord or want something that won't dangle, a 1/4" adapter plug (i.e. RCA-to-1/4" , mini-to-1/4") Thank you Dave and AnotherScott, anxious to try this and see if it helps! Quote Link to comment Share on other sites More sharing options...
Bill Spencer Posted February 14, 2017 Share Posted February 14, 2017 Or you can find someone really small to keep their pinky in there. Try Hans Brinker; he has experience in this sort of thing. Quote Link to comment Share on other sites More sharing options...
trebleclef Posted February 14, 2017 Share Posted February 14, 2017 Or you can find someone really small to keep their pinky in there. Try Hans Brinker; he has experience in this sort of thing. He he. Don't know the reference! Googled it. Still not sure. Sorry mod, went OT... now, back to your regularly scheduled programming. Quote Link to comment Share on other sites More sharing options...
Al Coda Posted February 14, 2017 Share Posted February 14, 2017 He he. Don't know the reference! Googled it. Still not sure. ... the story of the little Dutch boy who plugs a dike with his finger. A.C. Quote Link to comment Share on other sites More sharing options...
HAMEGZ Posted February 15, 2017 Share Posted February 15, 2017 He he. Don't know the reference! Googled it. Still not sure. ... the story of the little Dutch boy who plugs a dike with his finger. A.C. Oh boy could I get a TOS banned........ Quote SpaceStation V3, MoxF6,PX5S,Hammond-SK2,Artis7,Stage2-73, KronosX-73,MS Pro145,Ventilator,OB DB1,Lester K Toys: RIP died in the flood of 8/16 1930 Hammond AV, 1970s Leslie 145, 1974 Rhodes Stage Link to comment Share on other sites More sharing options...
cphollis Posted February 20, 2017 Share Posted February 20, 2017 Yes, this thread has been beaten to death, but I still get pinged regularly by folks who are still struggling with this amp. So I wrote a short blog post to summarize what I've learned so far: http://chucksblog.typepad.com/late_bloomer/2017/02/dialing-in-the-cps-spacestation-v3.html Quote Want to make your band better? Check out "A Guide To Starting (Or Improving!) Your Own Local Band" Link to comment Share on other sites More sharing options...
Doerfler Posted February 20, 2017 Share Posted February 20, 2017 May The Force Be With You. Excellent blog post, Chuck. Quote Link to comment Share on other sites More sharing options...
Al Coda Posted February 20, 2017 Share Posted February 20, 2017 So I wrote a short blog post to summarize what I've learned so far: http://chucksblog.typepad.com/late_bloomer/2017/02/dialing-in-the-cps-spacestation-v3.html Isn´t it the HF tweeter is separate and the midrange driver/horn is what´s inside the coax speaker? You might have that accidently mistaken. Great article nonetheless ! A.C. Quote Link to comment Share on other sites More sharing options...
AnotherScott Posted March 11, 2017 Share Posted March 11, 2017 However, there's a muddiness and congestion to the midrange that wasn't there before which is especially noticeable on - you guessed it - acoustic piano sounds. ... I wish I wasn't the only one on the forum that has heard both units. To that end, if anyone from the area wants to bring an original v3 over to A/B, I'd be glad to do that. I hope someone takes you up on that! Though also, I'd be curious to see yours even put up against another new unit, just to see if there could possibly be something wrong with yours. Third possibility: Speakers are sometimes known to "break in" over time. Is it possible that your new SS sounds like your old one did when you first got it, but not as good as the old one did after you'd played it for a few dozen hours? If you've used it a bunch, I wonder if it might be sounding any better now. Or if you haven't used it much, maybe there would be some benefit from sending some noise to it for x hours. (I'm not convinced about there being that much difference from speaker break-in, but I'm not ready to rule out the possibility either.) In my time with the original v3, I found I could not get the AP sounding the way I wanted without a bit of parametric EQ adjustment from my board. (I used my ZXa1 for reference.) If the new one is indeed different, but can likewise be adjusted with just a slightly different EQ tweak, then, to me, it would end up being 6 of one, half dozen of the other, except the half dozen weighs less. ;-) Quote Maybe this is the best place for a shameless plug! Our now not-so-new new video at https://youtu.be/3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out! And hopefully I'll have something new here this year. ;-) Link to comment Share on other sites More sharing options...
Dave Bryce Posted March 12, 2017 Share Posted March 12, 2017 However, there's a muddiness and congestion to the midrange that wasn't there before which is especially noticeable on - you guessed it - acoustic piano sounds. ... I wish I wasn't the only one on the forum that has heard both units. To that end, if anyone from the area wants to bring an original v3 over to A/B, I'd be glad to do that. I hope someone takes you up on that! The offer stands. It be ideal if someone does it before I have to send the Nord Piano back, and I did just send the review in. Though also, I'd be curious to see yours even put up against another new unit, just to see if there could possibly be something wrong with yours. We actually listened to another new unit at Aspen's place before I took the one I did. It doesn't sound like there's anything wrong with it - it just sounds different for the reasons I stated. The most noticeable thing to me is the strain/change in sound and balance at higher volumes - almost sounds ike there's a bit of compression happening. Still sounds like an SS though - don't get me wrong. Third possibility: Speakers are sometimes known to "break in" over time. Is it possible that your new SS sounds like your old one did when you first got it, but not as good as the old one did after you'd played it for a few dozen hours? I'm hip - I work with a high end speaker manufacturer, and I'm all about the break-in. The v5 has been through a bunch of playing at my home and on two gigs now. Still sounds the same to me....and, as previously mentioned, a few band members noticed as well. Or if you haven't used it much, maybe there would be some benefit from sending some noise to it for x hours. Using noise is not an ideal to break a speaker in - no reason to do that to the HF driver. A low pitch, low amplitude sine wave is a better choice. Personally, I prefer playing Actual Music (iTunes on shuffle) through a speaker to break them in. In my time with the original v3, I found I could not get the AP sounding the way I wanted without a bit of parametric EQ adjustment from my board. (I used my ZXa1 for reference.) If the new one is indeed different, but can likewise be adjusted with just a slightly different EQ tweak, then, to me, it would end up being 6 of one, half dozen of the other, except the half dozen weighs less. ;-) I did tweak the EQ - the mid control needed to be set a touch differently than on the v3. Like I said, I thought my problem with the mid was because of the NP3 I was reviewing at first until I took the Nord up to my studio. When I ran the PC3's AP through the v5, I noticed a slight difference there too...but most of the other sounds are just fine. dB Quote ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
cphollis Posted March 12, 2017 Share Posted March 12, 2017 Here's what I've found: with a bit of work, APs through the SSv3 sound acceptable. Not stellar, just acceptable. Every other instrument sounds like the bomb: EPs, B3 w/leslie sim, synths, samples, etc. One small amp on an amp stand, perfect for all the small gigs and rehearsals. Quick story? Just started up with a new band. They play LOUD, that's just what they do. No commentary from me is going to change it. All sorts of questions about the SSv3, because it's LOUD and it does STEREO. The call it the magic juju amp. Quote Want to make your band better? Check out "A Guide To Starting (Or Improving!) Your Own Local Band" Link to comment Share on other sites More sharing options...
Synthaholic Posted March 13, 2017 Share Posted March 13, 2017 Does anyone know of any guitarists using the SSv3 to take full advantage of their pedalboard wonders? Quote The fact there's a Highway To Hell and only a Stairway To Heaven says a lot about anticipated traffic numbers People only say "It's a free country" when they're doing something shitty-Demetri Martin Link to comment Share on other sites More sharing options...
zxcvbnm098 Posted March 14, 2017 Share Posted March 14, 2017 Dave, PM me if you want me to bring down my SSv3. I've got Dave Ferris' old one. Quote Link to comment Share on other sites More sharing options...
Dave Bryce Posted March 14, 2017 Share Posted March 14, 2017 Dave, PM me if you want me to bring down my SSv3. I've got Dave Ferris' old one. Any time you wanna come up to TO, let me know! dB Quote ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
hardware Posted March 14, 2017 Share Posted March 14, 2017 Isn´t it the HF tweeter is separate and the midrange driver/horn is what´s inside the coax speaker? You might have that accidently mistaken. A.C. I actually get nice high end turning down the tweeter. It tends to make APs like PianoTeq sound better. I detune and do unison per note on the Upright. It's the lowest frequency of the tweeter that emphasizes those edits too much. Used an LPF but it affected the 6.5 side firing speaker, tried a parametric, no joy, just turned the sucker down to a 9 OClock position and boosted the 6.5" to 3 OClock. No more over emphasized detuning. It was as annoying as the old Yamaha Electric Grand. Always had at least one String with false beats Quote Magnus C350 + FMR RNP + Realistic Unisphere Mic Link to comment Share on other sites More sharing options...
TimA Posted March 15, 2017 Share Posted March 15, 2017 So what's a realistic omnisphere mic? I googled it and all I got was you and Spectrasonics... Quote KronosX, ssv3, Vpiano, fulcrum fa22ac, Rupert neve line mixer, tons of weird guitars, axe-fx ultra, a couple of nice tube amps (Elmwood and Carr) Eventide Harmonizer Link to comment Share on other sites More sharing options...
AnotherScott Posted March 15, 2017 Share Posted March 15, 2017 Well, Realistic is Radio Shack's own brand... which would probably go well with a Magnus C350 organ... Quote Maybe this is the best place for a shameless plug! Our now not-so-new new video at https://youtu.be/3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out! And hopefully I'll have something new here this year. ;-) Link to comment Share on other sites More sharing options...
Dave Bryce Posted March 15, 2017 Share Posted March 15, 2017 Dave, PM me if you want me to bring down my SSv3. I've got Dave Ferris' old one. Any time you wanna come up to TO, let me know! Okay, we just took a listen to both, side by side in the same room. Brother zxcvbnm098 will post his own impressions, but here are mine: The difference is actually less subtle than I thought. There's no question that the v5 has a congestion or muddiness in the midrange which is not present in the v3, and that the dynamics are limited almost as if there's some sort of compression on the output. Also it was interesting to note that the power handling is apparently different, which I hadn't noticed previously. We matched the levels of every knob at one point, and the volumes were quite different - v3 is louder than v5. We went as simple as possible - my PC3 plugged directly into the amp with high quality cables. No mixer, no processing - nothing. Both amps are still here, so I'll be able to send some more time digging in. If anyone else wants to come check it out, feel free to PM me. dB Quote ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
timwat Posted March 15, 2017 Share Posted March 15, 2017 db, Earlier in the thread, you had mentioned v5 seemed to have better LF output than v3. Is that still the case after your A/B shootout? And...except for that possible improvement (and the schlep factor), it sounds like v5 has some noticeable disadvantages vis a vis v3: 1. MR congestion 2. "compressed" dynamics 3. lower apparent SPL Quote .. Link to comment Share on other sites More sharing options...
zxcvbnm098 Posted March 15, 2017 Share Posted March 15, 2017 I would echo Dave's comments. He has much better ears than me, but I would say that the v3 just has a rounder, fuller, livelier sound in the crucial area most of us play in. Punchier would be a another was of saying it? Certainly more pleasing to my ears. I'm glad I went and let Dave play. So much easier to have another player so I could listen objectively. And yes, the older unit is louder. Oh, and don't play the Nord Piano 3. The damn thing is lovely..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.