The Captain Posted February 9, 2006 Share Posted February 9, 2006 Considering an RME interface...(eg Multiface) Site says it can take 1/4" balanced inputs. Selectable +4/-10 inputs. my dump question.... Can I connect some older +4 XLR gear to it ? Would it just be a matter of getting an XLR -> 1/4 stereo (TRS) cable ? Link to comment Share on other sites More sharing options...
Prague Posted February 10, 2006 Share Posted February 10, 2006 Yes, you can. See if any specs are available for the older gear, but you will not hurt anything at all. Link to comment Share on other sites More sharing options...
The Captain Posted February 10, 2006 Author Share Posted February 10, 2006 Thanks ! One piece is an 80's tascam mixer - decent enough. The other is an old/ancient langevin mixer (+4 xlr). I have the docs - I think it has the old pin-2-hot problem, but have not confirmed. Link to comment Share on other sites More sharing options...
Prague Posted February 10, 2006 Share Posted February 10, 2006 No problem with either. The hot pins just need to get to the Tip and Ring. Keep the outputs in phase on each mixer, too. Try an adapter. Rewire a cable if necessary. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.