hirsute Posted August 6, 2020 Share Posted August 6, 2020 I'm thinking about buying the K&M 18950 stand for my Crumar Mojo 61 w/ lower manual, and had a question about the position of the 18952 stacker that works with the stand. I'm trying to figure out how wide the two stacker bars will be spread when the stand is assembled for my Mojo, so I can figure out what size boards would work on the stacker. If anyone has the 18950 set up for a Mojo, can you measure the distance between the inserts for the stacker bars when the stand is spread for the Mojo? Alternatively, can anyone with the stand measure the distance from the outside edge the 18950 to the insert bars where the 18952 stacker attaches, so I can do the math and figure it out from there? Many thanks! Quote Link to comment Share on other sites More sharing options...
dfcas Posted August 7, 2020 Share Posted August 7, 2020 I have the stand and just ordered the stackers, which will be here Monday. I'll give you the measuremenst on the stand in a few hours and will be able to give you measurements on the stackers Monday. Quote Link to comment Share on other sites More sharing options...
dfcas Posted August 7, 2020 Share Posted August 7, 2020 From the end of the stand to the center of the stacker slot is 6 3/4 inches. I have my stand set somewhat narrow and it is 23" 58cm center to center of the stacker slots. Quote Link to comment Share on other sites More sharing options...
hirsute Posted August 7, 2020 Author Share Posted August 7, 2020 Thank you! Greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.