soundaddict416 Posted August 17, 2001 Share Posted August 17, 2001 i have my mpc 2000xl hooked up 2gether with a alesis qs 6.1. i can record a sequence from the keyboard on to the mpc 2000. but when i change the program on the keyboard the sequence on the mpc will change too Link to comment Share on other sites More sharing options...
Rod S Posted August 17, 2001 Share Posted August 17, 2001 You need to setup the MPC so it doesn't receive program change commands. There's gotta be that option; almost every synth has it. I don't think you can disable sending program change commands from the qs6 without completely disabling the midi output as a whole, but I can take a look at mine and see. I think you have to do it from the MPC Korg Kronos X73 / ARP Odyssey / Motif ES Rack / Roland D-05 / JP-08 / SE-05 / Jupiter Xm / Novation Mininova / NL2X / Waldorf Pulse II MBP-LOGIC American Deluxe P-Bass, Yamaha RBX760 Link to comment Share on other sites More sharing options...
Dave Bryce Posted August 17, 2001 Share Posted August 17, 2001 Maybe the base channel of the MPC needs to be set to a different base channel than the QS6.1 - that might do it... Rod is right, though - the MPC is the place that you should look to find the solution, not the QS. dB ==> David Bryce Music • Funky Young Monks <== Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.