analogholic Posted June 9, 2017 Share Posted June 9, 2017 Can't find how to route sounds to the aux outs on the PC3 All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. Arthur Schopenhauer Link to comment Share on other sites More sharing options...
Bill Spencer Posted June 9, 2017 Share Posted June 9, 2017 First edit screen in Setup Mode. Make sure to set Output>Aux Out Pair Mode to "Normal" in Master Mode. Link to comment Share on other sites More sharing options...
Delaware Dave Posted June 9, 2017 Share Posted June 9, 2017 If a program, go to the 'progfx' tab set the output to 'sec' (aux). It probably reads 'main'. See page 6-48 of the owners manual. If a setup you can route each zone in the setup independently to the output of your choice. In each zone of the setup go to the ch/prg tab and set the out to Pri for main or sec for aux. See page 7-4 in the manual. 57 Hammond B3; 69 Hammond L100P; 68 Leslie 122; Kurzweil Forte7 & PC3; M-Audio Code 61; Voce V5+; Neo Vent; EV ELX112P; GSI Gemini & Burn Delaware Dave Exit93band Link to comment Share on other sites More sharing options...
analogholic Posted June 9, 2017 Author Share Posted June 9, 2017 Thanks a lot !!!!! All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. Arthur Schopenhauer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.