ehand

Thanks Max! Its good to know that you were able to send out the midi data from your PC4 song files. I have a very outdated DAW. However, I'll look for the right parameters and try again.

I'm pretty sure I've tried 200%, but I will certainly try again! Thanks for the info!

I'll look into that - could be less hassle than the toggle (or pressure!).

I should call Kurzweil and discuss this - the Medini keybed, and the required AT setting vs the software setup. If they have the same software routine as the PC3, a numerical setting may need to be changed for the Medini keybed.

I have the same problem. It wasn't a problem on my PC3 (which died). I used pressure to control the Leslie speed. It worked very smoothly. That's nearly impossible on my PC4, even with the press S override, the lightest touch setting and max pressure. I've tried every combination - no dice.

I play a Kurzweil PC4. I like it in many ways, however I'm having a problem with midi data from the song files. When I go into storage, it only gives the option to export as a .PC4 file. It does not give me the option to convert to a .MID file, or even a .SNG file (as my old PC3 did). So I gave up on this, and decided to simply play a song file through the midi usb into my computer DAW. However, it will not send the midi events data through the usb. To confirm this, I played a song live from the keyboard through the usb midi. My DAW captures it with no problems. To summarize, my computer will not recognize midi data from a song file being played on the PC4, but will accept the midi data as long as I'm playing live from the keyboard. What's the deal? I never, ever had this problem with my old PC3, which no longer works. Do any of you have information on this that I apparently don't have?

What is the procedure for sequencing on the PC4 using MULT as the record track. I can only hear one layer when recording in MULT mode. I need to hear all of them as I am recording. This should help me use the MULT option as a songwriting/ arranging tool. I can't get it to work. I'm doing what the manual says to do. There must be some detail, I'm not aware of. Can someone help me?

Thanks Tom! I've never tried programming the FUN settings, even on my old PC3. I'll give it a try. Thanks Tom! I've never tried programming the FUN settings, even on my old PC3. I'll give it a try.

If anyone discovers a great setting for using pressure to change Leslie rotation speed on the PC4, please let me know. Thank you!

I'm having a very hard time getting a suitable pressure setting on my PC4 to change the rotation speed in a multi with a KB3. It was easy on my PC3. I didn't have to mess with press S percentages. There's not adequate info in the manual.

I'm considering a Kurzweil PC4 SE, which doesn't have physical drawbars like the standard PC4. Does anyone know whether or not the touchscreen allows virtual control over the KB3 drawbars?

I can't tell you about the Artis, since I play an original PC3. I can, however, relate to you than since I upgraded to windows 10, and downloaded the latest soundtower version, my PC3 is not recognized in the same way it used to be. Its so bad, I have given up on soundtower. Could it be a lack of support for windows 10? Also: I'm not sure whether or not Artis has jacks for more than one CC pedal. On my PC3, I rely fairly heavily on my setups, with two volume pedals (organ & piano), plus pressure set to legato on the organ channel to control the leslie speed.