Qfiz Posted January 22, 2001 Share Posted January 22, 2001 I have a Sound Blaster PCI 64D card, and I am trying to setup MIDI. I have a Korg N364, and I attempted to use an editor/librarian to develop patches for company Soundtower. I was getting good MIDI Out, but NO MIDI In. Does anyone have experience with an SB PCI 64, to advise me? Thanx Link to comment Share on other sites More sharing options...
Guest Posted January 22, 2001 Share Posted January 22, 2001 Hey, I am not sure if this will help but you should check to see if the SB card is set to recieve MIDI from the proper port. The SB cards have a couple of different settings, like haveing the MIDI files trigger the synth that is built into the card or go out through the MIDI out port. You didn't say what software you are using but there should be a 'configure MIDI devices' option or something like that. Use that to check to see what the SB settings are set to. Good luck Kev Link to comment Share on other sites More sharing options...
Qfiz Posted January 22, 2001 Author Share Posted January 22, 2001 Thanks Kev. The product I was attempting to use was software called N-Edit Pro. I was getting MIDI out, but no MIDI in. I was running the N364 thru the "game port", and something about the MIDI set-up wasn't jiving. Might have been a glitch. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.