Bass Bastard Posted October 9, 2010 Share Posted October 9, 2010 I was given a Boss DD3. It is the version with surfacemount circutry. When I test it, the LED comes on but both outputs stay dry. All wiring appears to be connected solidly and there are no obviously bad caps. Anyone ever run into this or know a fix? I am very good with a soldering iron even on fine pitch parts. (Mil Spec and IPC 610 back in the day when i was still reworking boards.) Before I borrow my buddy's scope and component level check this bad boy, wondering if there is a known issue here? www.burning3.com Music Man Stingray 5 HH Peavey T-40 Hartke LH500 Ampeg SVT410HLF Link to comment Share on other sites More sharing options...
DanYmaL X Posted October 9, 2010 Share Posted October 9, 2010 Check out one or both of these two forums... loads of info and lots of friendly folks with tons of knowledge to share... just like here, though, do a search before posting your question... chances are real good someone has already solved the problem for you. http://www.diystompboxes.com/smfforum/ http://music-electronics-forum.com/ Good luck DX Aerodyne Jazz Deluxe Pod X3 Live Roland Bolt-60 (modified) Genz Benz GBE250-C 2x10 Acoustic 2x12 cab Link to comment Share on other sites More sharing options...
Bass Bastard Posted October 9, 2010 Author Share Posted October 9, 2010 Thank you! www.burning3.com Music Man Stingray 5 HH Peavey T-40 Hartke LH500 Ampeg SVT410HLF Link to comment Share on other sites More sharing options...
DanYmaL X Posted October 9, 2010 Share Posted October 9, 2010 No problem... hope you can find some answers... DX Aerodyne Jazz Deluxe Pod X3 Live Roland Bolt-60 (modified) Genz Benz GBE250-C 2x10 Acoustic 2x12 cab Link to comment Share on other sites More sharing options...
p5string Posted October 15, 2010 Share Posted October 15, 2010 You can also check out the technical board on this forum: http://www.bossarea.com/forum/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.