rlanternyc.rr.com Posted December 28, 2000 Share Posted December 28, 2000 I have a Mac IICi running Sample Cells with a Studio 3 Midi interface. I also have Logic Platinum running on a Pentium III through the Unitor 8 Midi interface. How can I use my Sample Cells with Logic Platinum? I tried connecting a midi out of the Unitor to a Midi in on the Studio 3 and was able to trigger the Sample Cells from Logic Platinum, but was not able to distinguish midi channels. Link to comment Share on other sites More sharing options...
Anderton Posted December 28, 2000 Share Posted December 28, 2000 I don't have SampleCell nor have I used it, but surely there must be some way within SampleCell to assign different sounds to different MIDI channels. Perhaps it defaults to Omni mode, and you need to find some sort of multitimbral mode. In any event, if you're getting MIDI from the Pentium to the IIci, you're halfway there. Good luck, hopefully some SampleCell whiz can help out. Craig Anderton Educational site: http://www.craiganderton.org Music: http://www.youtube.com/thecraiganderton Twitter: http://www.twitter.com/craig_anderton Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.