Buckets75aol.com Posted July 13, 2000 Share Posted July 13, 2000 Hi there all, Just curious if anyone out there has any good general ideas or techniques for cleaning your studio-- home studio or otherwise. Any tips for keeping dust from gathering, or getting to those hard to reach areas behind tangles of wires? Also, any hints for general upkeep would be greatly appreciated. For instance, I recently learned that the pots for knobs on mixers and instruments are self-cleaning; one good full twist in each direction should keep those babies running nicely for a while. Thanks, Adam [This message has been edited by Buckets75@aol.com (edited 07-13-2000).] Link to comment Share on other sites More sharing options...
Uh Clem Posted July 13, 2000 Share Posted July 13, 2000 I had some sort of dust filter installed when they did my AC - works pretty well. I see 10x more dust around my electrical components at home - I need to have those guys come retro one into my house. ------------------ Steve Powell Bull Moon Digital Atlanta GA www.mp3.com/stations/bullmoondigital www.thedurians.com www.mp3.com/thedurians Steve Powell - Bull Moon Digital www.bullmoondigital.com Link to comment Share on other sites More sharing options...
Anderton Posted July 14, 2000 Share Posted July 14, 2000 You're right to be concerned about dust, it is a problem and can cause maintenace headaches. Dropclothes do help to a certain extent, but when you take them off, the dust scatters. Apparently some vacuum cleaners are better than others in terms of keeping dust inside the container rather than blowing some of it out again. Once I visited George Petersen's studio and remarked on its freedom from dust. He replied "Dustbuster." One general piece of advice: When your computer's off, remove the keyboard, take it outside, turn it upside down, and shake it genrly. You'd be amazed how much stuff ends up down those cracks! Craig Anderton Educational site: http://www.craiganderton.org Music: http://www.youtube.com/thecraiganderton Twitter: http://www.twitter.com/craig_anderton Link to comment Share on other sites More sharing options...
Anderton Posted July 15, 2000 Share Posted July 15, 2000 This may be overly obvious, but don't let anyone smoke in your studio. Smoke particles are very small, can get into anything, and are extremely hard to clean. Craig Anderton Educational site: http://www.craiganderton.org Music: http://www.youtube.com/thecraiganderton Twitter: http://www.twitter.com/craig_anderton Link to comment Share on other sites More sharing options...
THE MIX FIX Posted July 15, 2000 Share Posted July 15, 2000 You're supposed to CLEAN your studio and home? http://www.musicplayer.com/ubb/confused.gifhttp://www.musicplayer.com/ubb/eek.gif So THAT'S what I've been doing wrong all these years!! http://www.musicplayer.com/ubb/biggrin.gif ------------------ Bob. Bob Buontempo. AKA: - THE MIX FIX Also Hanging at: http://recpit.prosoundweb.com Link to comment Share on other sites More sharing options...
InSights7 Posted July 16, 2000 Share Posted July 16, 2000 Originally posted by Anderton: Apparently some vacuum cleaners are better than others in terms of keeping dust inside the container rather than blowing some of it out again. I use a Rainbow vaccume cleaner. It has water inside the container instead of a filter. The water filters the dirt. This unit does not blow out dust particles back into the room. http://www.musicplayer.com/ubb/cool.gif ------------------ Dan Matthews InSight Sound Recording P. O. Box 2455 Loveland, CO 80539 (970) 663-1650 InSight Sound Web Page Dan Matthews InSight Sound Recording Loveland, CO (970) 663-1650 InSight Sound Web Page Link to comment Share on other sites More sharing options...
Paul Schubert Posted July 23, 2000 Share Posted July 23, 2000 I have an air cleaner in my room and run it frequently. I can run my furnace blower without the burners fired. With a clean filter (and the proper size) in place it acts similar to a large air cleaner. there are new filters made that will capture smaller particles. In addition, I will run both while I vacuume and dust (with a really nice feather duster). I also have covers for my gear. Link to comment Share on other sites More sharing options...
Guest Posted July 31, 2000 Share Posted July 31, 2000 ummmm. This might sound strange, but.... I found a mouse running around my studio the other week. I freaked (but not as much as my wife!) I figure the little bugger could get hungry and take bites out off my cables,etc. I tried regular mouse traps, but the guy was pretty wily. Then, I saw a feature on National Geographic that said mice loved peanut butter. Not cheese. So, I baited a trap with the stuff and in less that 30 mins, he was caught! Pretty cool. Moral of the story: DO NOT EAT in the studio! Peanut butter most especially. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.