jschlefhotmail.com Posted August 18, 2001 Share Posted August 18, 2001 What frequency should I set my sub to enhance if I am working with ns 10's someone told me to set it @ 100hz but it just does not sound right? Thanks is advance. Link to comment Share on other sites More sharing options...
DC Posted August 22, 2001 Share Posted August 22, 2001 You really want your sub to handle the bottom octive, typically below 80 Hz or so. Thing is, if you don't high pass the NS 10's you'll have both them and the sub reproducing some of the same frequencys. If your sub doesn't feature an x-over, then you're gonna have to get some caps to band pass the NS 10s at your desired frequencys. I don't have a crossover value chart in front of me, but it seems like around 400 mF non polar caps between your + speaker wire and your + terminal on the Yammys should do the trick for a 6 db roll off at around 100 Hz. -David http://www.garageband.com/artist/MichaelangelosMuse Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.