hardware Posted May 21, 2016 Share Posted May 21, 2016 Nice upgrade. Noticeable tonal changes. Lower baffle stands out more now when adjusting Spread. It is the best quality Prog/Rock clone I ever bought. Really nice definition going from around 180 on Tube Amp down to 85 clean. The Leslie Throb on 250 makes Doppler extreme. One super happy customer Tom T from Diversi must love what he does for a living as he is 110% top shelf support. Quote Magnus C350 + FMR RNP + Realistic Unisphere Mic Link to comment Share on other sites More sharing options...
Delaware Dave Posted May 21, 2016 Share Posted May 21, 2016 Anyone using a NIB4D to control HX3? I am finding that everything is working great except C/V. All I can get is vibrato which I would never use. When I switch the controller to chorus the HX3 still has vibrato. Kinda frustrating. I would take that question back to Diversi or Carsten; since the HX3 should should be pre-configured to work with the NIB4D. Quote 57 Hammond B3; 69 Hammond L100P; 68 Leslie 122; Kurzweil Forte7 & PC3; M-Audio Code 61; Voce V5+; Neo Vent; EV ELX112P; GSI Gemini & Burn Delaware Dave Exit93band Link to comment Share on other sites More sharing options...
hammonitup Posted May 22, 2016 Share Posted May 22, 2016 anybody have a UHL? i would love to update mine to the latest 3.924 but i am waiting for UHL to post the file to their support page. do i need to wait or can i use "HX3mk3_uhl.hex" that is in the 3.924 download folder? Quote Link to comment Share on other sites More sharing options...
Dave Osoff Posted May 22, 2016 Share Posted May 22, 2016 Contact Wolfgang at UHL - I've asked him that same question about previous HX3 updates and he has told to NOT install anything but official UHL updates. I'm sure he'll be making that available soon. Quote Nord Stage 3 Compact Nord Stage 2 EX Compact Korg Kronos 2 73 Mag C2 organ UHL X3-1 organ GSI DMC-122 Radial KL8 Motion Sound Kp500S Macbook Pro Falcon, UVI, Kontakt, Logic, PT Link to comment Share on other sites More sharing options...
hammonitup Posted May 23, 2016 Share Posted May 23, 2016 i have contacted him. unfortunately i am just told to wait another week, or (more recently) no reply at all. i know this update will really help the sound of the Uhl especially in split mode with left hand bass (i know because i also have a HX3 module and have updated that already.) it has been almost a month since the release of the update! Quote Link to comment Share on other sites More sharing options...
Dave Osoff Posted May 23, 2016 Share Posted May 23, 2016 I guess I've been out of the loop for a few months. I didn't know a new HX3 update was out. Quote Nord Stage 3 Compact Nord Stage 2 EX Compact Korg Kronos 2 73 Mag C2 organ UHL X3-1 organ GSI DMC-122 Radial KL8 Motion Sound Kp500S Macbook Pro Falcon, UVI, Kontakt, Logic, PT Link to comment Share on other sites More sharing options...
M_G Posted May 23, 2016 Share Posted May 23, 2016 Please wait and DO NOT install anything from the Keyboardpartner HX page (beta and latest) to your UHL !!! (makes me wonder cause the files shouldn't be there) All customers will be informed via Email by Wolfgang Uhl directly when the final release is finished !!! Wolfgang is doing intensive tests and fine tunings before releasing his version..... Be patient, it will be released soon (and is then running "bug free" !) ;-)) Quote Studio: Hammond XK5-XLK5, Roland Fantom 8, Prophet 5, Roland SE02, Neo Vent, HX3-Expander, Yamaha Montage M7 Live: Yamaha CP88, Hammond SKX Pro, Hammond XB2-HX3, Roland Fantom 07, Roland SA1000, Neo Vent Link to comment Share on other sites More sharing options...
M_G Posted May 23, 2016 Share Posted May 23, 2016 Again. Anyone using a Native Instruments B4D drawbar controller with their HX3? Thanks in advance. Some users are using the NIB4 Controller successfully. Maybe it's not the HX ? Have you checked the Midi Out of your NIB4 Hardware ? -> MidiOX ! Quote Studio: Hammond XK5-XLK5, Roland Fantom 8, Prophet 5, Roland SE02, Neo Vent, HX3-Expander, Yamaha Montage M7 Live: Yamaha CP88, Hammond SKX Pro, Hammond XB2-HX3, Roland Fantom 07, Roland SA1000, Neo Vent Link to comment Share on other sites More sharing options...
ballatman Posted May 23, 2016 Share Posted May 23, 2016 As MG says, be patient. I've always found it worth the wait for Wolfgang. He's the Man! Quote Link to comment Share on other sites More sharing options...
TomKittel Posted May 23, 2016 Share Posted May 23, 2016 As MG says, be patient. I've always found it worth the wait for Wolfgang. He's the Man! Here's an announcement of Wolfgang which I just found in my email: Hello X3 Customers, We would like to reiterate strongly that only firmware updates approved by Uhl Instruments GmbH may be used for Uhl X3 organs. Our approved firmware updates are available for download only on www.uhl-instruments.com under "Support". Firmware updates which are downloaded from external pages (for example, HX3 updates from Github Company Keyboard partner), can, even if they contain the name "Uhl", damage the programming of Uhl Instruments X3 motherboards. X3 organs with damaged firmware will no longer work and will need to be sent back and be reprogrammed by Uhl Instruments. These repairs would not be covered under warranty. Transport and repair costs would need to be charged to the customer. We are working on a new firmware 4.0. It will be published in about 4 to 6 weeks. With firmware 4.0 the X3's will sound even richer and much fatter (we actually thought that this would not be possible!). In addition there will be some more small changes. All customers will be informed by mail as soon as firmware 4.0 will be available. Thanks to all and continue to enjoy the X3's Let's rock !!! Wolfgang Uhl Owner Quote LIFE IS SHORT, GO GET THE GEAR YOU WANT ;-) Link to comment Share on other sites More sharing options...
jmolino Posted May 23, 2016 Share Posted May 23, 2016 1000 replies. Wow. Quote Link to comment Share on other sites More sharing options...
mate stubb Posted May 23, 2016 Share Posted May 23, 2016 1000 replies. Wow. Only 3647 more to go to equal the SS thread! Quote Moe --- Link to comment Share on other sites More sharing options...
KBPChristian Posted May 24, 2016 Share Posted May 24, 2016 Hi Bill, Carsten has tested our implementation with Doepfer d4B controller and it worked well. Your NI controller might have a slightly different implementation of MIDI CC numbering. Can you please send us a screenshot/copy of MIDI data your controller send when C/V control is changed? You may use a MIDI monitoring tool like MIDI-OX and copy&paste the data from monitor window. Please send it to info@keyboardpartner.de. Christian KeyboardPartner Quote Link to comment Share on other sites More sharing options...
hardware Posted May 25, 2016 Share Posted May 25, 2016 Will I still have this sustenuto capability if I uprade? I thought it was a regular sustain but it will hold a chord and let you trill right above it... Never had that so I am stoked..!! Do not want to lose that so somebody try it out and let me know please... Hankyu.............. Quote Magnus C350 + FMR RNP + Realistic Unisphere Mic Link to comment Share on other sites More sharing options...
analogholic Posted May 28, 2016 Share Posted May 28, 2016 Does anyone know if the Nord C2 midi template work for the Stage 2? Or does anyone have a Stage 2 template? Quote All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. Arthur Schopenhauer Link to comment Share on other sites More sharing options...
Dave Osoff Posted May 28, 2016 Share Posted May 28, 2016 I have a stage 2 template. I'm out of town today but send me a note tonight or tomorrow and I'll send it over to you this weekend. I haven't upgraded to the latest firmware yet. Also need to do that this weekend. Quote Nord Stage 3 Compact Nord Stage 2 EX Compact Korg Kronos 2 73 Mag C2 organ UHL X3-1 organ GSI DMC-122 Radial KL8 Motion Sound Kp500S Macbook Pro Falcon, UVI, Kontakt, Logic, PT Link to comment Share on other sites More sharing options...
analogholic Posted May 28, 2016 Share Posted May 28, 2016 Thanks man. Had to roll my own as I gig tonight... Quote All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. Arthur Schopenhauer Link to comment Share on other sites More sharing options...
hammonitup Posted June 7, 2016 Share Posted June 7, 2016 well, it's been another three weeks since Uhl owners were told to wait for an update for their instruments (message #2780574). hate to be the squeaky wheel, but i can't imagine what is taking them so long to post this update to their site (with whatever tweaks they add). in all, it's been over 7 weeks since the release of the 9.22 update. i guess everyone else is more patient than i am! Quote Link to comment Share on other sites More sharing options...
M_G Posted June 7, 2016 Share Posted June 7, 2016 Did you read your email you got from Uhl??? "... another 4-6 weeks...." now we have 3.... there are some issues with the flash tool not the firmware, I think its better to wait one or two weeks and your x3 is running after the update, isn't it??? Quote Studio: Hammond XK5-XLK5, Roland Fantom 8, Prophet 5, Roland SE02, Neo Vent, HX3-Expander, Yamaha Montage M7 Live: Yamaha CP88, Hammond SKX Pro, Hammond XB2-HX3, Roland Fantom 07, Roland SA1000, Neo Vent Link to comment Share on other sites More sharing options...
wineandkeyz Posted June 21, 2016 Share Posted June 21, 2016 Hoo boy! I picked up a used HX3 a few weeks ago and just finished my first gig with it. I was triggering it from a Roland Fantom X7, so I didn't have real-time control of the drawbars, etc., but the HX3 sounded amazing. Amazing and inspiring. Now I've got some decisions to make... I also have a Hammond XK-3C/Vent combo that I use when stage space permits. Another KC poster, Dave Doerfler, suggested that I marry the HX3 up with the Hammond and that I could probably eliminate the Vent. Before last weekend I was hesitant about that but now I'm seriously considering it. Looks like I've got some A/B'ing to do! Quote Live: Yamaha S70XS (#1); Roland Jupiter-80; Mackie 1202VLZ4; IEMs or Traynor K4 Home: Hammond SK Pro 73; Moog Minimoog Voyager Electric Blue; Yamaha S70XS (#2); Roland Integra-7; Wurlitzer 200A Link to comment Share on other sites More sharing options...
Polkahero Posted June 21, 2016 Share Posted June 21, 2016 Hoo boy! I picked up a used HX3 a few weeks ago and just finished my first gig with it. I was triggering it from a Roland Fantom X7, so I didn't have real-time control of the drawbars, etc., but the HX3 sounded amazing. Amazing and inspiring. Now I've got some decisions to make... I also have a Hammond XK-3C/Vent combo that I use when stage space permits. Another KC poster, Dave Doerfler, suggested that I marry the HX3 up with the Hammond and that I could probably eliminate the Vent. Before last weekend I was hesitant about that but now I'm seriously considering it. Looks like I've got some A/B'ing to do! I ditched my Vent and am controlling the HX3 with my Hammond SK1. Go for it! Quote '57 Hammond B-3, '60 Hammond A100, Leslie 251, Leslie 330, Leslie 770, Leslie 145, Hammond PR-40 Trek II UC-1A Alesis QSR Link to comment Share on other sites More sharing options...
Dave Osoff Posted June 21, 2016 Share Posted June 21, 2016 Agreed! I still use my Vent with my HX3, but it's all pre-wired on my pedalboard. The built in Leslie sounds great! The SK1 is a great match for the expander. Quote Nord Stage 3 Compact Nord Stage 2 EX Compact Korg Kronos 2 73 Mag C2 organ UHL X3-1 organ GSI DMC-122 Radial KL8 Motion Sound Kp500S Macbook Pro Falcon, UVI, Kontakt, Logic, PT Link to comment Share on other sites More sharing options...
mate stubb Posted July 15, 2016 Share Posted July 15, 2016 I just updated my HX-3 module after it lay unused for almost a year. Had some ComErr problems but Tom got me straightened out. It looks like I got a brand new version that was only put up yesterday. I'm trying to drive it with my XK-1C, so don't have a midi template that works 100%. Using the SK template for now, but a few controls are wrong and I can't select different C/V settings. Nevertheless, after tweaking last night and tonight I'm getting something pretty good, that's quite fun to play. Leslie sim is entirely useable now, which wasn't the case a year ago. I still have to tweak CV which is always my downfall. Right now the Mojo still has the edge on that elusive shimmer, but HX-3 out of the box is better than I have been able to dial the XK-1C and doesn't sound as phase shifty. Nice ballsy sound, percussion thunks satisfyingly, click is good with all the oldness turned up to stun. Using the 1955 tonewheel set cuts the shrillness in the top octave pretty well. OD has a few unpleasant artifacts when turned way up, but I can get pretty dirty before that happens. Quote Moe --- Link to comment Share on other sites More sharing options...
Doerfler Posted July 15, 2016 Share Posted July 15, 2016 excellent news Dave. I haven't updated mine for a minute, certainly didn't do the last one. Looking forward to the newest update. Quote Link to comment Share on other sites More sharing options...
hardware Posted July 15, 2016 Share Posted July 15, 2016 Ive been using hardware overdrive with controllable HPF Cut. Must try the 55 drawbars. Never thought of that. Liked the thunk of the recapped. Thanks for the tip. Quote Magnus C350 + FMR RNP + Realistic Unisphere Mic Link to comment Share on other sites More sharing options...
Polkahero Posted July 15, 2016 Share Posted July 15, 2016 You sure the latest firmware has been posted? It's supposed to be version 4.0 and the one showing on Diversi's website is 3.925. Quote '57 Hammond B-3, '60 Hammond A100, Leslie 251, Leslie 330, Leslie 770, Leslie 145, Hammond PR-40 Trek II UC-1A Alesis QSR Link to comment Share on other sites More sharing options...
mate stubb Posted July 15, 2016 Share Posted July 15, 2016 You sure the latest firmware has been posted? It's supposed to be version 4.0 and the one showing on Diversi's website is 3.925. 3.925 is what I have installed. I was on the phone with Tom and he said that a new update was being uploaded at that very moment. I thought that was the one he remotely installed on my box, but I was a spectator at that point. Anyway, I have shut it down and come back to it several times and it still sounds good to fresh ears. I have a gig tonight but still want to do some CV tweaking soon. Quote Moe --- Link to comment Share on other sites More sharing options...
LX88 Posted July 18, 2016 Share Posted July 18, 2016 Let us know if you get that CV issue sorted out. It was the deal breaker for me last year for any setting using 5 1/4 drawbar settings. Lotta updates on this since last year BTW. I agree it was better than the Hammond Suzuki stuff I heard though. Quote Link to comment Share on other sites More sharing options...
Delaware Dave Posted July 18, 2016 Share Posted July 18, 2016 Yes, that 5 1/4 drawbar sound certainly is elusive... :-!".. It was the deal breaker for me last year for any setting using 5 1/4 drawbar settings." Quote 57 Hammond B3; 69 Hammond L100P; 68 Leslie 122; Kurzweil Forte7 & PC3; M-Audio Code 61; Voce V5+; Neo Vent; EV ELX112P; GSI Gemini & Burn Delaware Dave Exit93band Link to comment Share on other sites More sharing options...
hammonitup Posted July 21, 2016 Share Posted July 21, 2016 Maybe 'cause it's 5-1/3 ? :-} Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.