Dlrshort
-
Posts
354 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Articles
Downloads
Gallery
Store
Posts posted by Dlrshort
-
-
Would a passive DI box make any improvement in piano sound quality before going into the Tonematch?
-
Piano man 51, I noticed that the left output is the mono output on the Yamaha. So you are saying that regardless of how it is labeled I still may get a better sound with the right?
-
For a while now my band has been using multiple Bose Towers. My setup includes a Yamaha digital piano and a Hammond XK5. I had been running both in mono. The Hammond sounds fine but the piano never sounds as good as I would like. I have been wondering if the mono configuration is the problem.
I never explored trying to run at least the digital piano in stereo. I was wondering if any of you are using the towers and if you have come up with any creative configurations to improve sound, or at least use a stereo configuration?
-
American Woman
-
Just got the MVII for the XK5 board. Connected with 1/4" cables the MVII behaves normally when using B,and Bb presets. If the factory sounds are used the internal sim is not bipassed it seems. When I had my SK there was a hammond cable from 8 pin connector to 1/4 and the bipassed the internal sim completely for all drawbar settings and presets.
I see hammond has an 11 pin cable to two 1/4s, However the MIni Vent only has one 1/4". input. Would this cable work or is there another way? Thanks in advance.
-
What in your opinion is more realistic , and why?
-
I was considering buying this to use on stage. Do any of you have any experience with it being miked to the FOH? If done that way, is it necessary to utilize a keyboard amp to sim the lower rotor? If needed, I have a RCF tt08 monitor that I have been using. I feed an output from a Korg Grand Stage and Hammond XK5 into a mixer which then feeds into the monitor. And the mixer goes to FOH. Any way to utilize this setup with Motion sound and the monitor without leaving the relatively light monitor and lugging my Motion sound SN 500? Thanks
-
Once a guitar band always a guitar band. I had a similar experience.
-
Ok thanks. Do you feel the vent is an improvement over the internal Leslie?
-
I just realized that the Sk1 and 2 used an 8 pin, but the 11pin is used by the XK. Hopefully the1/4' will work
-
Thanks. I spoke to HAMMOND support I"m not sure the guy I spoke to about thi was that knowledgeable about this. He just kept asking why did I need this because the internal sim was so good on the XK5
-
With the mini vent will it work with an 11 pin leslie connection from the organ clone to the 1/4" input or a 1/4" to 1/4" from the clone? If it works with both, does the 11 pin cable cause an automatic bypass to the internal leslie sym while the 1/4" to 1/4" does not?
-
Without opening the unit what changes does setting A or B do?
-
No more mini vent specifically for organ. Is the generic mini ok for organ? Is it programmable? Can you set perimeters like over drive?
-
Anybody using the vent with this board? Does it offer a better sound over the Leslie sim in your opinion? Or, not worth it.
-
Recommendations for preamp? Also wondering about Leslie 2121. Doesn"t that have a quarter inch input? Would that bypass the need for a pre-amp?
-
How is Mojo. (not Xt) connected to Leslie speakers?
-
I read through this thread quickly, but my question is, for those of you that own this, what motivates you. The farfisa and vox are pretty well covered on many boards, the B3, and AP voices are only so-so. I grew up owning a farfisa and a vox and hated the sound of them. Still hate the way they sound.
-
I gig with the Vivo S3. I am with a Guess Who Tribute so I need mostly AP sounds. I agree that the EPs and B3 sounds need to be tweaked but for me they are acceptable for my needs. The S3 is built beautifully and easy to use and very light. I use a Mojo 61 for tone wheel sounds and mix both through a Key Largo. I have no doubt that Dexibell will be listening to us in this forum and have found them very responsive to any questions I have had. No regrets with my purchase.
-
I just received the Dexibell bag for the Vivo S3 beautifully made. I wonder if they outsource that to someone else beautiful fit and quality just like the keyboard.
-
Would anyone have any idea what amplification or monitor the Dexibell was being played through during the promotional videos?
-
As I posted before three just received the Vivo S3 two days ago but really havent had time to play with it yet. It has amazing build quality beautiful AP piano sounds which I am most interested in and its amazing light weight.
Dexibell is on Facebook messenger and does respond to questions fairly quickly. Yesterday I even emailed a gentleman at DB regarding a question and it turned out it was the president of the company. He emailed back within a few minutes with an answer to my question. I think I will enjoy dealing with this company and the board is definitely a keeper from what I can see so far. Absolutely love the touch, feel and sound.
-
Just received the S3 from Sam Ashe. Havent been able to spend but a few minutes with it. Esthetic and build quality are very nice.. The first thought that came to mind was white end caps look perfect, why would you change them? Ill have more later.
-
I really do not get automatic sliders. I guess theyre trying to save preset positions for the tone wheel. I am more concerned with Ap sound so I dont think I would ever spring for that S9.
Journey Band Piano sound
in The Keyboard Corner
Posted
Those of you who cover Journey, could you tell me what settings are being used for ‘Faithfully’ and ‘Don’t Stop Believing’? It it a CP80 with effects? TIA.