Dlrshort
-
Posts
354 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Articles
Downloads
Gallery
Store
Everything posted by Dlrshort
-
Those of you who cover Journey, could you tell me what settings are being used for ‘Faithfully’ and ‘Don’t Stop Believing’? It it a CP80 with effects? TIA.
-
Would a passive DI box make any improvement in piano sound quality before going into the Tonematch?
-
Piano man 51, I noticed that the left output is the mono output on the Yamaha. So you are saying that regardless of how it is labeled I still may get a better sound with the right?
-
For a while now my band has been using multiple Bose Towers. My setup includes a Yamaha digital piano and a Hammond XK5. I had been running both in mono. The Hammond sounds fine but the piano never sounds as good as I would like. I have been wondering if the mono configuration is the problem. I never explored trying to run at least the digital piano in stereo. I was wondering if any of you are using the towers and if you have come up with any creative configurations to improve sound, or at least use a stereo configuration?
-
American Woman
-
Just got the MVII for the XK5 board. Connected with 1/4" cables the MVII behaves normally when using B,and Bb presets. If the factory sounds are used the internal sim is not bipassed it seems. When I had my SK there was a hammond cable from 8 pin connector to 1/4 and the bipassed the internal sim completely for all drawbar settings and presets. I see hammond has an 11 pin cable to two 1/4s, However the MIni Vent only has one 1/4". input. Would this cable work or is there another way? Thanks in advance.
-
What in your opinion is more realistic , and why?
-
I was considering buying this to use on stage. Do any of you have any experience with it being miked to the FOH? If done that way, is it necessary to utilize a keyboard amp to sim the lower rotor? If needed, I have a RCF tt08 monitor that I have been using. I feed an output from a Korg Grand Stage and Hammond XK5 into a mixer which then feeds into the monitor. And the mixer goes to FOH. Any way to utilize this setup with Motion sound and the monitor without leaving the relatively light monitor and lugging my Motion sound SN 500? Thanks
-
Once a guitar band always a guitar band. I had a similar experience.
-
Mini Vent ii and XK5 hammond clone connections
Dlrshort replied to Dlrshort's topic in The Keyboard Corner
Ok thanks. Do you feel the vent is an improvement over the internal Leslie? -
Mini Vent ii and XK5 hammond clone connections
Dlrshort replied to Dlrshort's topic in The Keyboard Corner
I just realized that the Sk1 and 2 used an 8 pin, but the 11pin is used by the XK. Hopefully the1/4' will work -
Mini Vent ii and XK5 hammond clone connections
Dlrshort replied to Dlrshort's topic in The Keyboard Corner
Thanks. I spoke to HAMMOND support I"m not sure the guy I spoke to about thi was that knowledgeable about this. He just kept asking why did I need this because the internal sim was so good on the XK5 -
With the mini vent will it work with an 11 pin leslie connection from the organ clone to the 1/4" input or a 1/4" to 1/4" from the clone? If it works with both, does the 11 pin cable cause an automatic bypass to the internal leslie sym while the 1/4" to 1/4" does not?
-
Without opening the unit what changes does setting A or B do?
-
No more mini vent specifically for organ. Is the generic mini ok for organ? Is it programmable? Can you set perimeters like over drive?
-
Anybody using the vent with this board? Does it offer a better sound over the Leslie sim in your opinion? Or, not worth it.
-
Recommendations for preamp? Also wondering about Leslie 2121. Doesn"t that have a quarter inch input? Would that bypass the need for a pre-amp?
-
How is Mojo. (not Xt) connected to Leslie speakers?
-
I have one for sale at a great price if you are interested.
-
Can anyone tell me if the upper manual alone can accommodate the CU-1? If so, how is it configured? I do not see any way on the menu to accommodate it. Thanks.
-
I was told you can install a CU 1 switch on a single XK1 upper manual. If this is true what settings do you choose? I don't think with no lower that controls gives you a choice selection for CU1. Thanks.
-
Can any body tell me a roller bag that fits XK5?
-
Work the same way on the mojo 61. That"s why Velcro was invented.
-
Could anyone tell me if you can use half moon switch with single keyboard option?
-
I read through this thread quickly, but my question is, for those of you that own this, what motivates you. The farfisa and vox are pretty well covered on many boards, the B3, and AP voices are only so-so. I grew up owning a farfisa and a vox and hated the sound of them. Still hate the way they sound.
