-
Posts
92 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Articles
Downloads
Gallery
Store
Posts posted by kalpajazz
-
-
Select a performance you want to use, then press "shift+live set." This sends the performance to the first available slot of the live set mode. You have 16 slots per screen.
- 2
-
6 hours ago, pjd said:
However, the "Felt Mono-SP Piano" Performance starts making snap, crackle and pop sounds as soon as it is selected. This Performance behavior seems busted and not intentional. Don't even need to hit a key to get sampled Rice Krispies. 🤔
Turn off the "vinyl record noise" effect
-
I think you should save a different performance with each program change you need in maistage. Then the pedal takes care of advancing to the next modx program.
Remember to enable the transmission zone (Part Settings/Zone=on, Pgm Change=on, MidiSend=on
-
59 minutes ago, Stokely said:
HAHAHAHAHA
HAHAHAHAHAHAHA!!!!!!!!!
-
You are right, it is ambiguous. Actually I was referring to the "Kbd Ctrl" parameter, which is the one that stops working in edit mode.
-
Scenes don't seem to work when the modx enters edit mode (for example, tap the screen to move a virtual volume fader) Once you exit it (click on the name of the performance) they work correctly.
-
Sorry for the confusion, I was referring to Roland Cloud's Expansion series SRX Piano II
-
I think EXZ002 Stage Piano 2 corresponds to the "Superior Grand" samples
-
Hello, a question to the KC gurus: Nautilus also handles smouth transition with external midi zones? Example, combi 1 transmits on channel 4 and combi 2 transmits on channel 5... thanks
-
Hello friends, I ask the owners of the modx 8 a question,
In my unit I have noticed an anomaly ... in all the black keys, when playing the same note repeatedly, the first one emits a much higher sensitivity value than the subsequent ones. Even a trill on different black keys. And it is not necessary to repeat the note too quickly, only with a slight tie and the phenomenon occurs.
Please if those who read this can check it on their units to see if it is a failure of my particular unit or it is an error in the manufacture of the modx.
Sorry if the explanation is not clear, my native language is Spanish
Thanks
-
Korg Nanopad can do it with a ribbond instead of a pitch wheel
Quick Roland question.
in The Keyboard Corner
Posted
The parameter you must set is "Edit / System / Part Mode= 16 Part". In this way Upper 1 receives on channel 1, Upper 2 on channel 2 and Lower on channel 3. Parts 4 to 16 receive on their respective channels. Bank and program changes are documented in the manual. I hope that helps!!