Jump to content


b3 billy

Member
  • Posts

    9
  • Joined

  • Last visited

About b3 billy

  • Birthday 11/17/1965

Converted

  • occupation
    musician
  • hobbies
    music
  • Location
    philly burbs
  1. what is the difference bewtween a patch and a favorite on an sk2.. cant seem to make the preset buttons do what I want.. that is save what I set up on the keyboard and have a preset button remember it by pushing the preset buttons???????????they dont stay??help??
  2. ANYBODY HAVE A GOOD STAND FOR AN SK2 TO PLAY STANDING UP IN A BAND SITUATION??? also I posted before about the keyboard locking up software wise, im putting in the software upgrade and pray that does the trick, it locked up 2x lastnight on me. ALSO A BUZZING COMING FORM THE KEYBOARD JUST BELOW THE PERCUSSION SWITCHES (SK2) sounds like a bad speaker rattling in the keyboard(no speaker in keyboard I know just describing condition)On the second sk2 as well, hammond rushed the 1st one back under warrenty and gave me a new no questions asked, has anyone else seen this, its really bad?????? quality control issoes for sure..
  3. SK2 HOOKUP TO A MOTIONSOUND. here it is my new sk2 I want the leslie to run thru the rotary and the ensemble sound thru the clean channels. you have to buy a hammond xld-811 which is an 8 pin to 11 pin interface (sk2 has an 8 pin) then follow the schematic on the motionsound webpage to go from 11 pin into the motion sound for audio and fast/slow with 1/4 jacks. I had an engineer figure out the voltage issue and we then opened up this interface, there is a propriatary circut board in there, you need this box to tell the sk2 there is a real rotary cabinet attached. if you plug in a real leslie the sk2 sees it )its called leslie detect) then the ensemble pianos etc go out the 1/4 plugs. the interface is 169.00 list CAUTION YOU WILL BLOW THINGS UP IF YOU TRY TO MAKE THE CABLE YOURSELF WITHOUT THAT VOLTAGE FROM THE INTERFACE.( just hammond doing their thing) also my fast/slow controls on the organ operate the motionsound kbr3d and also my legacy kbrm. job done complete and it works
×
×
  • Create New...