Jump to content


Junior 1

Member
  • Posts

    1,046
  • Joined

  • Last visited

About Junior 1

  • Birthday 08/06/1951

Converted

  • Location
    Long Island
  1. Thanks Myles. I'll try the 12AY7. It seems to be a sturdy little beast, and if you use the volume and tone knobs on a single coil guitar it helps. It's a novelty amp and I bought it on Black Friday. My Pignose sounds better!
  2. Hi Myles, I picked up a Fender Greta and would like to get some more clean headroom out of it. It is a 2 watt amp with a 12AX7 preamp tube and a 12AT7 power tube. I've never seen that before. What if anything can I do to get some more cleans? Thank You Anthony
  3. Thanks for the reply to a dumb question, but now, it's gospel because Myles told me!Have a great day. Anthony
  4. Hi Myles, I hope all is well. I've been looking at a few Boss pedals and in all their info they state that any power supply other than a boss one could damage the pedal. Is this BS or do you really need a Boss power supply. Thanks Anthony
  5. Hi Myles.Happy Holidays and thanks for all your help. Anthony
  6. Hi Myles, As usual, thanks for an expert answer. I'm going to leave those Vox speakers in there.
  7. Hi Myles, It's been a long time since I've asked a dumb question so... I know if you have an 8 ohm tube amp, you must use a cabinet that is a least 8 ohms or better. I have a Vox DA10 with 2 6.5 inch 8 ohm vox speakers in it. The amp is solid state and 8 ohms. Players on the vox forum are connecting 2 6.5 inch Jensen Mod 4 ohm speakers to the amp. Is this OK? Is it different with a solid state amp? Thanks. Anthony
  8. I thank you and my Pignose thanks you.
  9. Hi Myles, It's been a while since I;ve asked a dumb question, so here goes! Can I use a 1/4 inch male to (2) 1/4 inch female stereo Y cable to connect (2) 8 ohm speaker cabinets to an amp. In this case it's a Pignose head unit. Will it still be 2 mono speakers in parallel? Don't laugh too hard! Thanks Anthony
  10. Thanks for your quick reply Myles, have a great day.
  11. Good Morning Myles. I recently picked up a Piggy in a Box. The legendary nasty Pignose sound in a pedal. It's a 5 watt SS amp and a really nasty distortion pedal combined. I'm using it with a 10 inch, 8 ohm, Jensen cab and it's loud, nasty and fun. I'm told it's a 4 ohm amp. Does the same rule apply as with tubes? Higher speaker ohms are ok? I can't imagine it getting any louder! Thanks Anthony
  12. Hi Myles, Happy Monday! I use a EH Holy Stain for my Verbs and Tremolo. It's EH's multi FX pedal. The last knob on the top of the pedal is a Clean/Fuzz/OD selector. I would like that to be a stomp switch. Could I install a 3 position heavy duty switch in it's place? I could tap that sucka with my size 9's easy. Thanks Anthony
  13. Thanks Myles. Being a old guy, I thought it might be a throw back to the old days when we wanted the battery to die!
  14. Hi Myles, Why do pedal makers supply their pedals with heavy duty batteries, instead of alkaline ones? Thanks
×
×
  • Create New...