Hey Jan, welcome aboard.
I don't know how your Midas's input strips are laid out, but I'd try going from the Focusrite's (unbalanced: -10 DBv) line out to the channel's 'insert' jack(probably inserted only half way). You should end up after the Midas's pre, but may loose the EQ/Monitor functions.. depending on where they are in the channel signal flow layout. You could also try the channel 'direct in' jack, if the Midas has that option. 'Line in' will not bypass the Midas's pre.
Good luck, Paul
_________________________
WUDAYAKNOW.. For the first time in my life, I'm wrong again!!
| 
