Music Player Network Home Guitar Player Magazine Keyboard Magazine Bass Player Magazine EQ Magazine
Page 1 of 1 1
Topic Options
#432665 - 09/26/03 02:22 PM How to connect a pre-amp and compressor together?
RockNRoll
Senior Member


Registered: 09/30/01
Posts: 92
Loc: HONG KONG

Offline
Hi there! Could use some tips! Thanks for any advice!

I have an external Preamp (RNP by FMR audio), and may get an external compressor...perhaps a Presonus. How do you connect the two together in a chain before it all reaches the audio interface? For example...does it go from the Mic into the input of the Preamp, then from the Preamp's output into the Compressor input, then from the Compressor's output finally into the audio interface?

I'm using a Motu 828...If I'm using an external Preamp, what would be the best way to adjust the gain setting on the Motu 828 internal mic-pre in order to bypass it, if that's indeed the proper way...

Thanks again!

Top
#432666 - 09/26/03 03:02 PM Re: How to connect a pre-amp and compressor together?
T.H.
Senior Member


Registered: 09/10/02
Posts: 295
Loc: NEW JERSEY

Offline
That's correct, just turn the GAIN all the way down on the 828, simple.

you might want to use an XLR to 1/4 going Compressor out into 828 in
( I dont think the 828 has XLR inputs)

Top
#432667 - 09/27/03 01:31 AM Re: How to connect a pre-amp and compressor together?
HiRoller
Senior Member


Registered: 08/19/02
Posts: 401
Loc: Portland, OR USA

Offline
If you get an RNC compressor to match your RNP, all you need is a stereo 1/4" cable (for each channel) to patch them together.
_________________________
my band: Mission 5

Top
#432668 - 09/27/03 03:24 AM Re: How to connect a pre-amp and compressor together?
where02190
MP Hall of Fame Member


Registered: 11/06/01
Posts: 5402
Loc: Weymouth, Ma. USA

Offline
Mic->mic preamp->compressor->A-D converter.
_________________________
Hope this is helpful.

NP Recording Studios
Analog approach to digital recording.

Top
Page 1 of 1 1


Hop to:
Support Your Forums