Music Player Network Home Guitar Player Magazine Keyboard Magazine Bass Player Magazine EQ Magazine
Page 1 of 2 1 2 >
Topic Options
#2956324 - 11/04/18 09:00 AM Hammond B3 clone
radee Offline
Member

Registered: 11/02/18
Posts: 1
Hey all,

New here but I'm looking for a decent and reasonably priced Hammond B3 clone. I'm not a tech guy and have played acoustic piano most of my life but I'm joining a band and I have a need. Anything between 2-4 grand with minimal need for programming. Also what about a decent amp to capture the bass? Thanks!

Top
KC Island
#2956326 - 11/04/18 09:11 AM Re: Hammond B3 clone [Re: radee]
jeffinpghpa Offline
Gold Member

Registered: 05/22/07
Posts: 510
Loc: Charlotte, NC
In no particular order, there are lots of great sounding options:

Crumar Mojo and Mojo61 are very popular on this forum.
Viscount Legend and Legend Live, as well as Legend Solo are great boards.
Hammond XK5, SKX
Nord C2D
GSI DMC122 with Gemini built in
Other boutique stuff

Most people on the forum land with either Crumar, Viscount or Hammond when talking about dedicated clone wheels. Even more users here use the organs in multi purpose boards like Nord and Roland.

You should consider the following differences:

- Single or dual manual style?
- Tone and editing capabilities
- Will you add pedals?
- Will you need a real Leslie connection, a pedal like Vent or an onboard simulator?
- Key action
- Number of drawbar sets
- Organ only or other sounds built in

You are in a price range with great choices.
_________________________
Yamaha U1 Upright, Kurzweil Forte 7, Viscount Legend Live, Roland FA-07, Novation SLMKII 49, Lots of iPad Stuff, Pair of QSC K10 Speakers, Allen & Heath Zed 10 Mixer

Top
#2956340 - 11/04/18 11:51 AM Re: Hammond B3 clone [Re: jeffinpghpa]
MoodyBluesKeys Offline
MP Hall of Fame Member

Registered: 03/27/08
Posts: 3443
Loc: eastern North Carolina
There are many different degrees of "decent" clone, somewhat dependent on just how much organ will be used and how exposed it is (solo instrument or small jazz group versus hard rock as an example).
I am well pleased with my Hammond SK1 73 key version. It gives me some very good Hammond, a reasonably good Leslie emulation, plus some added sounds which are not as good as my Kurzweil PC3 series, but adequate for a lot of the time. It is single-manual (although that can be split into upper and lower, or a separate MIDI keyboard can be used as the lower).
Someone more particular in really duplicating the original Hammond/Leslie combination would likely add a Neo Ventilator pedal for the Leslie emulation and warm distortion with increase in volume that it adds. BTW, don't forget to add some form of compatible expression pedal (kind of like a volume pedal, but it also affects tone and compression). SK1's come in 61, 73, and 88 key versions. Bass pedals can be added, but you won't likely want to do this unless you really get heavily into it (they are not inexpensive, and one has to learn how to simultaneously play keys with both ands and with feet).

The SK2 is a similar instrument, with two manuals instead of 1 (and not as lightweight). There are numerous other manufacturers, each has their own ideas on the instrument. I wasn't really satisfied with the Kurzweil's built-in KB3 organ Leslie effect. Also tried a Nord Electro 3 73 key for about a year, and sold it to buy the SK1.

There are many different techniques in playing Hammond styles, different genres of music have significantly different requirements. What makes it even more of a moving target is that original tonewheel Hammonds don't all sound the same (especially when some of them are 60+ years old with component changes and wear), also many different models over the years, so one person's ideal "Hammond" may be a lot different from another's.

I agree with Jeff, there are a number of great choices.
Something else that will considerably affect your choice is whether or not you will be playing just organ, organ with a separate acoustic piano (less likely), or need to cover both organ and other types of sounds like acoustic piano, electric piano, orchestral instruments, clavichords, etc.

There are endless arguments / spirited discussions on this forum about choices of different Hammond clones.
_________________________
Howard Grand|Hamm SK1-73|Kurz PC2|PC2X|PC3|PC3X|PC361; QSC K10's
HP DAW|Epi Les Paul & LP 5-str bass|iPad mini2
"Now faith is the substance of things hoped for, the evidence of things not seen."
Jim

Top
#2956345 - 11/04/18 12:28 PM Re: Hammond B3 clone [Re: MoodyBluesKeys]
Mitch Towne Online   content
Platinum Member

Registered: 01/26/07
Posts: 1035
Perfect reply Jeff! Let’s leave it there.

Top
#2956348 - 11/04/18 01:18 PM Re: Hammond B3 clone [Re: Mitch Towne]
CEB Offline
10k Club

Registered: 06/03/09
Posts: 13029
Depends on the player .... Is the player a Hammond organist? Do you have O.C.D. ? I get anal over interface things. I hate change. The control layout is often more important to me than the tone. They all sort of sound decent. 80% of the sound is from the Leslie. If you never played the real thing then no sense sweating the small things. Develop your own style. Some of our styles depend on dual manuals, pulling multiple registrations. Preset key tricks. Ect.... I take all my Leslie switching and audio output to my vent from the Leslie socket so I can use the normal half moon, kick switch and organ controls... No extra Vent foot switches. I do everything to make it like my 58. You don't need to do this. Most people probably don't even need a Leslie socket.

It's an individual player driven thing.


Edited by CEB (11/04/18 01:32 PM)
_________________________
"It doesn't have to be difficult to be cool" - Mitch Towne

"A great musician can bring tears to your eyes!!!
So can a auto Mechanic." - Stokes Hunt

Top
#2956350 - 11/04/18 01:33 PM Re: Hammond B3 clone [Re: radee]
stoken6 Offline
MP Hall of Fame Member

Registered: 05/12/12
Posts: 2008
Originally Posted By: radee
I'm joining a band and I have a need.


Welcome to the forum! Can you tell us more about the band/style of music? Does it require a "full-on" Hammond (two manuals, pedals, half-moon switch etc.)? You say you're mostly a pianist - are you going to retain a "focus" on piano in this band?

Related question: what other equipment do you already have (that you intend to use with this band)?

Cheers Mike.
_________________________
AX48.PM351.FC7.VFP2
One or two keyboards.

Top
#2956351 - 11/04/18 01:38 PM Re: Hammond B3 clone [Re: stoken6]
CEB Offline
10k Club

Registered: 06/03/09
Posts: 13029
Man... I'm a Hammond Suzuki guy but if you aren't an organist the 2 manual Mojo is a nice combination of great tones/ Modern features/ and giving you the things I( emphasis on I) think you need. Two sets of drawbars to be able to pull your next registration, and dual manuals .... If you are aa organ heavy rocker.


Edited by CEB (11/04/18 01:39 PM)
_________________________
"It doesn't have to be difficult to be cool" - Mitch Towne

"A great musician can bring tears to your eyes!!!
So can a auto Mechanic." - Stokes Hunt

Top
#2956371 - 11/04/18 04:00 PM Re: Hammond B3 clone [Re: radee]
Radagast Offline
Senior Member

Registered: 01/20/18
Posts: 180
Originally Posted By: radee
Hey all,

New here but I'm looking for a decent and reasonably priced Hammond B3 clone. I'm not a tech guy and have played acoustic piano most of my life but I'm joining a band and I have a need. Anything between 2-4 grand with minimal need for programming. Also what about a decent amp to capture the bass? Thanks!


If you want a great piano sound as well as some interesting organ features, and you can deal with 73 keys, check out the Dexibell J7. You can split the keyboard with two different organ sounds.


Edited by Radagast (11/04/18 04:01 PM)

Top
#2956379 - 11/04/18 05:43 PM Re: Hammond B3 clone [Re: Radagast]
EricBarker Offline
Senior Member

Registered: 07/25/18
Posts: 173
I'm under the impression that the original Mojo dual-manual, though having the advantage of two sets of drawbars, isn't quite as up-to-date as the 61? I know it's a Unix box instead of DSP with the 61, do they get updated and have feature revisions at the same time? I just don't hear about the older ones as much. It seems most seem to prefer the 61 with the add-on manual, rather than the dual.
_________________________
"All's fair in love, war, and the recording studio."

MacBook Pro running MainStage and various plugins (NI and other)
Arturia Keylab88, Crumar Mojo61, Seaboard Rise49, Vortex Keytar, Trumpet

Top
#2956383 - 11/04/18 06:03 PM Re: Hammond B3 clone [Re: EricBarker]
mate stubb Offline
Grand Poobah of the Trebuchet
10k Club

Registered: 10/26/03
Posts: 16222
Originally Posted By: EricBarker
I'm under the impression that the original Mojo dual-manual, though having the advantage of two sets of drawbars, isn't quite as up-to-date as the 61?


Not quite. I have an original Dual manual and a 61. The Dual runs on a PC with Windows Embedded. The Mojo 61 runs on DSP. Up until this very last update, it is my belief that Guido has managed to keep his core organ code intact across all platforms, rolling out updates to each platform as he has time to update the shim code that has to be different for each set of hardware.

With this very last update to Mojo 61, Guido has hinted that he may be bumping up against hardware or computational limitations on the Windows platform, so things might be diverging.

I think the Mojo software sounds head and shoulders above the rest for matching what I like organs to sound like. I do own a Viscount and it has a new update I have not done, so it is supposed to be improved recently also.

Disclaimer - not speaking for Guido, he can speak for himself!


Edited by matted stump (11/04/18 06:04 PM)
_________________________
Moe
---
Kawai Novus: "Please feel surprised even more."

http://www.hotrodmotm.com

Top
#2956389 - 11/04/18 06:51 PM Re: Hammond B3 clone [Re: mate stubb]
ShadowMan Offline
Senior Member

Registered: 03/29/08
Posts: 197
I'll add this to the earlier good responses...

You might consider a Nord C1 - for well under your budget. Granted it's an older model, but if you can deal with the electronic drawbars it's a great board. I played out with one for about 5 years and loved it. Slap a Lester K or Ventilator on it and you'd probably be quite happy.

Top
#2956428 - 11/05/18 03:14 AM Re: Hammond B3 clone [Re: mate stubb]
snarksoup Offline
Member

Registered: 09/24/18
Posts: 4
Originally Posted By: matted stump
The Dual runs on a PC with Windows Embedded. The Mojo 61 runs on DSP. Up until this very last update, it is my belief that Guido has managed to keep his core organ code intact across all platforms, rolling out updates to each platform as he has time to update the shim code that has to be different for each set of hardware.

With this very last update to Mojo 61, Guido has hinted that he may be bumping up against hardware or computational limitations on the Windows platform, so things might be diverging.

I think the Mojo software sounds head and shoulders above the rest for matching what I like organs to sound like. I do own a Viscount and it has a new update I have not done, so it is supposed to be improved recently also.

Disclaimer - not speaking for Guido, he can speak for himself!


So is the newest Mojo XT using this exact same "PC with Windows Embedded" (sounds like 'dead-end road' to me) engine that you mention ? I have been looking at dual-manual clonewheels and am now hoping that Mojo XT is DSP not embedded windows...

Top
#2956587 - 11/05/18 07:50 PM Re: Hammond B3 clone [Re: snarksoup]
Mitch Towne Online   content
Platinum Member

Registered: 01/26/07
Posts: 1035
The MojoXT is embedded Windows, not DSP.

Top
#2956593 - 11/05/18 09:21 PM Re: Hammond B3 clone [Re: Mitch Towne]
snarksoup Offline
Member

Registered: 09/24/18
Posts: 4
Originally Posted By: Mitch Towne
The MojoXT is embedded Windows, not DSP.


Oh well, I'm sure it's a great instrument, but,,,

Thanks for your reply.

Top
#2956601 - 11/06/18 12:33 AM Re: Hammond B3 clone [Re: snarksoup]
Gary75 Offline
Platinum Member

Registered: 12/04/03
Posts: 1581
That's ridiculous they are still using Windows embedded. Still using off the shelf PC sound cards inside as well? KeyB switched to DSP at the turn of the decade, and even then, the Mk1 Duo was Linux based.
_________________________
C3/122,Rhodes,D6,Juno6,Wurlitzer 200,MPC1000,KP3,KorgBX3/HX3/145,KorgM1,Roland System1,SL88Grand,Moog LP

Top
#2956602 - 11/06/18 12:53 AM Re: Hammond B3 clone [Re: Gary75]
Markay Offline
MP Hall of Fame Member

Registered: 01/28/12
Posts: 3113
Loc: Australia
Originally Posted By: Gary75
That's ridiculous they are still using Windows embedded. Still using off the shelf PC sound cards inside as well? KeyB switched to DSP at the turn of the decade, and even then, the Mk1 Duo was Linux based.


So I guess you never use an ATM?
_________________________
MainStage | Axiom 61 2nd Gen | Pianoteq | B5 | XK3c | EV ZLX 12P
"He helped me onto the bottom rung as a musician, from which, I might add, I never ascended" Glyn Johns - Sound Man

Top
#2956605 - 11/06/18 02:51 AM Re: Hammond B3 clone [Re: Markay]
Gary75 Offline
Platinum Member

Registered: 12/04/03
Posts: 1581
What's that got to do with anything? That's a bizarre response.
_________________________
C3/122,Rhodes,D6,Juno6,Wurlitzer 200,MPC1000,KP3,KorgBX3/HX3/145,KorgM1,Roland System1,SL88Grand,Moog LP

Top
#2956606 - 11/06/18 03:26 AM Re: Hammond B3 clone [Re: Gary75]
Markay Offline
MP Hall of Fame Member

Registered: 01/28/12
Posts: 3113
Loc: Australia
ATM's run windows embedded, another example - the Kronos is an Atom powered custom board with an SSD running Linux, is that similarly so "ridiculous" that it should also have been replaced by a DSP many years ago?
_________________________
MainStage | Axiom 61 2nd Gen | Pianoteq | B5 | XK3c | EV ZLX 12P
"He helped me onto the bottom rung as a musician, from which, I might add, I never ascended" Glyn Johns - Sound Man

Top
#2956608 - 11/06/18 03:29 AM Re: Hammond B3 clone [Re: Markay]
WesG Offline
MP Hall of Fame Member

Registered: 02/16/13
Posts: 3435
Loc: Inverary, ON, Canada
I prefer to judge things by how the work instead of what tools the builder used to make them. Anybody judging a keyboard by its operating system is foolish IMNSHO.
_________________________
Hammond: L111, M3, BC, CV, Franken CV, A100, B3
Leslie: 710, 760, 51C, 147, 145, 122, 31H
Yamaha: CP4, DGX-620, DX7II-FD-E!, PF85
Roland: VR-09
Band Site: http://DrBombay.ca/

Top
#2956609 - 11/06/18 03:36 AM Re: Hammond B3 clone [Re: WesG]
Markay Offline
MP Hall of Fame Member

Registered: 01/28/12
Posts: 3113
Loc: Australia
+1
_________________________
MainStage | Axiom 61 2nd Gen | Pianoteq | B5 | XK3c | EV ZLX 12P
"He helped me onto the bottom rung as a musician, from which, I might add, I never ascended" Glyn Johns - Sound Man

Top
#2956611 - 11/06/18 03:46 AM Re: Hammond B3 clone [Re: Markay]
Gary75 Offline
Platinum Member

Registered: 12/04/03
Posts: 1581
The ATM has been around since 1967, you don't think they are still running the same operating system do you?

I might as well have said I drive a car and a response of "I guess you don't use your legs"

Who wants to have a failure mid gig and wait for it to boot up when the competition has already improved hugely in that respect.

So yes, I do find it ridiculous they are still using the same system from ten years ago.
_________________________
C3/122,Rhodes,D6,Juno6,Wurlitzer 200,MPC1000,KP3,KorgBX3/HX3/145,KorgM1,Roland System1,SL88Grand,Moog LP

Top
#2956612 - 11/06/18 03:49 AM Re: Hammond B3 clone [Re: Gary75]
M_G Offline
Gold Member

Registered: 07/17/09
Posts: 553
Loc: Germany

.... and they already have the new DSP in their Mojo61!
_________________________
Studio: Hammond A3, Roland FP90, Prophet 6, Yamaha Montage 7, Reface CP, Moog Subseq 37, Korg Wavedrum, KR55pro, Neo Vent
Live: Korg Grandstage 73, HX3-KM Controller, Leslie 760 (11pin-mod), KP500S

Top
#2956622 - 11/06/18 05:23 AM Re: Hammond B3 clone [Re: M_G]
Stokely Offline
Platinum Member

Registered: 12/15/12
Posts: 1967
Loc: Florida
If you don't need a dual manual:

If you have need for other sounds (piano, electric piano, clav, synth etc) then I'd look at a Nord electro or maybe the Hammond sk1 or sk2. I'm not a huge fan of the springy action on these compared to a couple others. The Nord is probably going to be my choice due to midi capabilities and the nice pianos, plus being able to use some synth sounds.

The other competitor for me at least is the Mojo 61, which (by most accounts) would be a somewhat better organ experience coupled with a smaller selection of extra sounds.

I used to own a Roland VR700, and while likely the organ isn't quite as good as those two above, it certainly sounded just fine in my classic rock band. It had a very easy interface, no programming needed, you had all the organ controls handy and could pick a non-organ sound easily...and GREAT action and nice drawbars. So the Roland line(s) might work for you as well.


Edited by Stokely (11/06/18 05:23 AM)

Top
#2956628 - 11/06/18 05:37 AM Re: Hammond B3 clone [Re: Stokely]
AnotherScott Offline
10k Club

Registered: 10/19/09
Posts: 12912
Originally Posted By: Stokely
Nord electro or maybe the Hammond sk1 or sk2. I'm not a huge fan of the springy action on these compared to a couple others. The Nord is probably going to be my choice due to midi capabilities and the nice pianos, plus being able to use some synth sounds.

The Hammond is less springy than the Electro (i.e. doesn't push back as much), and the Hammond has stronger MIDI capabilities than the Electro. Both have some synth sounds... the Electro has more, but if you're looking at doing MIDI stuff anyway, it's easy to add more synth sounds to a Hammond (from an iOS device, for example), much better than the Nord in that respect. No pitch or mod wheel on either of them, unfortunately, though the Hammond does at least let you bend pitch on its internal synth sounds using a pedal. But the Electro still has lots of advantages over the Hammond... better overdrive on the organ, better acoustic pianos, low release point on the clavs that make them feel snappier, more extensive library of downloadable sounds (esp. other vintage keys), ability to load custom samples, some basic envelope controls on its sample/synth sounds, and (with the newest model) seamless sound switching and more split/layer flexibility (including the ability to split/layer two sounds without one of them having to be organ, as on the Hammond).
_________________________
Maybe this is the best place for a shameless plug! Our new video at https://www.youtube.com/watch?v=3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out!

Top
#2956639 - 11/06/18 06:28 AM Re: Hammond B3 clone [Re: AnotherScott]
jeffinpghpa Offline
Gold Member

Registered: 05/22/07
Posts: 510
Loc: Charlotte, NC
I think the criteria I posted earlier above still stands. Nord, Roland and Kurzweil are good sounding jack-of-all-trades boards that have modeled organs, drawbar controls and Leslie simulation. They're not going to function the same as a dedicated dual manual clone or provide a playing experience for many of the styles and techniques you would do on a vintage tonewheel Hammond.
_________________________
Yamaha U1 Upright, Kurzweil Forte 7, Viscount Legend Live, Roland FA-07, Novation SLMKII 49, Lots of iPad Stuff, Pair of QSC K10 Speakers, Allen & Heath Zed 10 Mixer

Top
#2956642 - 11/06/18 06:45 AM Re: Hammond B3 clone [Re: jeffinpghpa]
Outkaster Offline
MP Hall of Fame Member

Registered: 02/25/06
Posts: 6288
Loc: Rochester, NY
Roland and Kurzweil aren't major players in the conversation and I have a Forte. Could you get by with them in a pinch? yes probably. If you want a good organ emulation you really have to pay for it. Unless you are doing 90% organ on your gig I wouldn't carry a full rig either. That is a whole other thing requiring finances, logistical concerns and a lot of dedication.


Edited by Outkaster (11/06/18 06:48 AM)
_________________________
"Danny, ci manchi a tutti. La E-Street Band non e' la stessa senza di te. Riposa in pace, fratello"


noblevibes.com


Top
#2956643 - 11/06/18 07:03 AM Re: Hammond B3 clone [Re: Outkaster]
Delaware Dave Offline
MP Hall of Fame Member

Registered: 04/21/11
Posts: 3146
Loc: Take a guess ....
That's what makes the Gemini module so appealing to me. Not only do you get the Mojo in a box, you get at least 25 other sounds that are just as phenomenal in their own right (EP's, brass, strings, VA synth, horns, CP80, a rather large list). This is all done without having to lug around yet another keyboard; the downside is the midi hookup of cables and power supplies into the existing rig. If it is pre-hooked up in a rack then it isn't nearly as bad.
_________________________
57 Hammond B3; 69 Hammond L100P; 68 Leslie 122; Kurzweil PC3; GEM Equinox; Voce V5+; Neo Vent; EV ELX112P; GSI Gemini Desktop Module; www.dyinbreedband.com
www.thewildthingsrock.webs.com

Top
#2956648 - 11/06/18 07:18 AM Re: Hammond B3 clone [Re: Delaware Dave]
stoken6 Offline
MP Hall of Fame Member

Registered: 05/12/12
Posts: 2008
Another thread where the OP vanishes without trace...

Cheers, Mike.
_________________________
AX48.PM351.FC7.VFP2
One or two keyboards.

Top
#2956655 - 11/06/18 07:36 AM Re: Hammond B3 clone [Re: jeffinpghpa]
AnotherScott Offline
10k Club

Registered: 10/19/09
Posts: 12912
Originally Posted By: jeffinpghpa
I think the criteria I posted earlier above still stands.

Yup, it was perfect, which is why I had nothing to add to the thread, until stokely was comparing the Electro and SK1/2 for himself. As for the OP, as Mike pointed out, he hasn't yet been back to answer any of your good questions.
_________________________
Maybe this is the best place for a shameless plug! Our new video at https://www.youtube.com/watch?v=3ZRC3b4p4EI is a 40 minute adaptation of T. S. Eliot's "Prufrock" - check it out!

Top
#2956659 - 11/06/18 07:46 AM Re: Hammond B3 clone [Re: Gary75]
analogika Offline
Senior Member

Registered: 10/15/17
Posts: 177
Loc: Germany
Originally Posted By: Gary75
That's ridiculous they are still using Windows embedded. Still using off the shelf PC sound cards inside as well?

My freshly renovated SY77 still runs the same operating system and DACs it used in 1990.

Sounds great, works like a Yamaha.

Why change something that works great and reliably? Hackers?

Top
#2956664 - 11/06/18 07:59 AM Re: Hammond B3 clone [Re: analogika]
roygBiv Offline
Senior Member

Registered: 05/04/15
Posts: 424
Loc: Pacific NW
Yamahackers

Top
#2956691 - 11/06/18 11:15 AM Re: Hammond B3 clone [Re: roygBiv]
mate stubb Offline
Grand Poobah of the Trebuchet
10k Club

Registered: 10/26/03
Posts: 16222
My guess is that there will be a next generation dual Mojo with DSP. Makes too much sense not to.

In the meantime, my obsolete Windows CE Mojo dual kicks ass and runs rings around most other clones.

And no, they don't have off the shelf sound cards in them.
_________________________
Moe
---
Kawai Novus: "Please feel surprised even more."

http://www.hotrodmotm.com

Top
#2956695 - 11/06/18 11:24 AM Re: Hammond B3 clone [Re: analogika]
Gary75 Offline
Platinum Member

Registered: 12/04/03
Posts: 1581
Originally Posted By: analogika
Originally Posted By: Gary75
That's ridiculous they are still using Windows embedded. Still using off the shelf PC sound cards inside as well?

My freshly renovated SY77 still runs the same operating system and DACs it used in 1990.

Sounds great, works like a Yamaha.

Why change something that works great and reliably? Hackers?


It's a hardware keyboard with dedicated internal boards not using a third party front end to host the sound generating part.

I'm not interested in what 'runs rings' around other sounds, it was purely an observation.
_________________________
C3/122,Rhodes,D6,Juno6,Wurlitzer 200,MPC1000,KP3,KorgBX3/HX3/145,KorgM1,Roland System1,SL88Grand,Moog LP

Top
#2956699 - 11/06/18 12:03 PM Re: Hammond B3 clone [Re: analogika]
Al Coda Offline
MP Hall of Fame Member

Registered: 08/31/08
Posts: 4345
Loc: out in the sticks
Originally Posted By: analogika
Originally Posted By: Gary75
That's ridiculous they are still using Windows embedded. Still using off the shelf PC sound cards inside as well?

My freshly renovated SY77 still runs the same operating system and DACs it used in 1990.

Sounds great, works like a Yamaha.

Why change something that works great and reliably? Hackers?


thu


My TG77 (and many others) do(es) that too !

OTOH,- I dunno what it has to do w/ the "Hammond B3 clone" topic.

A.C


Edited by Al Coda (11/06/18 12:17 PM)

Top
#2956714 - 11/06/18 02:54 PM Re: Hammond B3 clone [Re: Al Coda]
CEB Offline
10k Club

Registered: 06/03/09
Posts: 13029
FTW! DOS 6 rocks!
_________________________
"It doesn't have to be difficult to be cool" - Mitch Towne

"A great musician can bring tears to your eyes!!!
So can a auto Mechanic." - Stokes Hunt

Top
#2956716 - 11/06/18 02:57 PM Re: Hammond B3 clone [Re: CEB]
WesG Offline
MP Hall of Fame Member

Registered: 02/16/13
Posts: 3435
Loc: Inverary, ON, Canada
The disk doubler in MS-DOS 6 was buggy AF. 6.2 was a big improvement.
_________________________
Hammond: L111, M3, BC, CV, Franken CV, A100, B3
Leslie: 710, 760, 51C, 147, 145, 122, 31H
Yamaha: CP4, DGX-620, DX7II-FD-E!, PF85
Roland: VR-09
Band Site: http://DrBombay.ca/

Top
#2956721 - 11/06/18 03:15 PM Re: Hammond B3 clone [Re: WesG]
Radagast Offline
Senior Member

Registered: 01/20/18
Posts: 180
DSP is so “last week”. I’m waiting for an organ based on FPGA.

Top
#2956726 - 11/06/18 03:29 PM Re: Hammond B3 clone [Re: Radagast]
jeffinpghpa Offline
Gold Member

Registered: 05/22/07
Posts: 510
Loc: Charlotte, NC
2001 called. They want their Windows XP license back.
_________________________
Yamaha U1 Upright, Kurzweil Forte 7, Viscount Legend Live, Roland FA-07, Novation SLMKII 49, Lots of iPad Stuff, Pair of QSC K10 Speakers, Allen & Heath Zed 10 Mixer

Top
#2956737 - 11/06/18 04:31 PM Re: Hammond B3 clone [Re: Radagast]
Kurt W Offline
Senior Member

Registered: 02/02/12
Posts: 253
Originally Posted By: Radagast
DSP is so “last week”. I’m waiting for an organ based on FPGA.

FPGA based organs have been there for several years; MAG and UHL organs based upon the HX3 B3 expander from Keyboardpartner in Germany.

Top
#2956739 - 11/06/18 04:41 PM Re: Hammond B3 clone [Re: Kurt W]
wd8dky Offline
Gold Member

Registered: 03/06/06
Posts: 990
Loc: Chicagoland
FPGAs are so '90's, when I started designing them. Let's go neural processing, so the clone can adjust its sound in real-time to whatever dream sound the player has in their head at any given moment.

Top
#2956745 - 11/06/18 05:42 PM Re: Hammond B3 clone [Re: wd8dky]
WesG Offline
MP Hall of Fame Member

Registered: 02/16/13
Posts: 3435
Loc: Inverary, ON, Canada
You people are so four-dimensional.
_________________________
Hammond: L111, M3, BC, CV, Franken CV, A100, B3
Leslie: 710, 760, 51C, 147, 145, 122, 31H
Yamaha: CP4, DGX-620, DX7II-FD-E!, PF85
Roland: VR-09
Band Site: http://DrBombay.ca/

Top
#2956748 - 11/06/18 06:20 PM Re: Hammond B3 clone [Re: WesG]
wd8dky Offline
Gold Member

Registered: 03/06/06
Posts: 990
Loc: Chicagoland
Originally Posted By: WesG
You people are so four-dimensional.


Like the four basic food groups (sugar, salt, fat. & alcohol)?

smile

Top
#2956753 - 11/06/18 06:50 PM Re: Hammond B3 clone [Re: wd8dky]
WesG Offline
MP Hall of Fame Member

Registered: 02/16/13
Posts: 3435
Loc: Inverary, ON, Canada
Don't be silly, sugar is only three dimensional. It's a cube, not a tesseract.


Edited by WesG (11/06/18 06:51 PM)
_________________________
Hammond: L111, M3, BC, CV, Franken CV, A100, B3
Leslie: 710, 760, 51C, 147, 145, 122, 31H
Yamaha: CP4, DGX-620, DX7II-FD-E!, PF85
Roland: VR-09
Band Site: http://DrBombay.ca/

Top
#2956771 - 11/07/18 12:49 AM Re: Hammond B3 clone [Re: Gary75]
Frank Montis Offline
Member

Registered: 10/12/16
Posts: 15
Loc: Netherlands
Originally Posted By: Gary75

So yes, I do find it ridiculous they are still using the same system from ten years ago.


The original Mojo is about 7-8 years old and still is on par with the best out there. And for your information, I have been on the road with it a LOT and it still works and sound fine. You may think it's ridiculous, but some people are still very happy with it. I am one of them. If you want a newer system there's the Mojo 61 and of course eventually there will be a new Mojo.

Calling something ridiculous just based on some biased opinion of an operating system seems kind of unfair to me, while in the end it still sounds better than most and has received free updates for many years.

Top
#2956773 - 11/07/18 01:32 AM Re: Hammond B3 clone [Re: Gary75]
Losendoskeys Offline
Platinum Member

Registered: 12/28/12
Posts: 1338
Loc: West Sussex, UK
Originally Posted By: Gary75
The ATM has been around since 1967, you don't think they are still running the same operating system do you?

I might as well have said I drive a car and a response of "I guess you don't use your legs"

Who wants to have a failure mid gig and wait for it to boot up when the competition has already improved hugely in that respect.

So yes, I do find it ridiculous they are still using the same system from ten years ago.

You're not making sense.
Failure at a gig is unlikely to be due to the operating system, it's likely to be hardware -the old gear I still use has been totally reliable over the last 12 years of gigging.
_________________________
Yamaha CP70B;Roland XP30/AXSynth/Fantom/FA76/XR;Hammond XK3C SK2; Korg Kronos 73;ProSoloist Rack+; ARP ProSoloist; Mellotron M4000D; GEM Promega2; Hohner Pianet N, Roland V-Grand,Voyager XL, RMI

Top
#2956781 - 11/07/18 03:25 AM Re: Hammond B3 clone [Re: Losendoskeys]
WesG Offline
MP Hall of Fame Member

Registered: 02/16/13
Posts: 3435
Loc: Inverary, ON, Canada
Wait until Gary finds out I use a ten-year-old operating system to process millions of transactions a day, guaranteeing 99.999% up time (that's 43 minutes of maintenance window per year). Those old operating systems, I tell ya, always worrying if they are going to come down with Alzheimer's or something.
_________________________
Hammond: L111, M3, BC, CV, Franken CV, A100, B3
Leslie: 710, 760, 51C, 147, 145, 122, 31H
Yamaha: CP4, DGX-620, DX7II-FD-E!, PF85
Roland: VR-09
Band Site: http://DrBombay.ca/

Top
#2956784 - 11/07/18 04:08 AM Re: Hammond B3 clone [Re: wd8dky]
Markyboard Offline
MP Hall of Fame Member

Registered: 02/10/01
Posts: 6106
Loc: Springfield, Virginia
Originally Posted By: wd8dky
FPGAs are so '90's, when I started designing them.


Yeah, I'm loving the recent marketing angle..."FPGA powered".
rolleyes facepalm

Top
#2956821 - 11/07/18 10:45 AM Re: Hammond B3 clone [Re: Markyboard]
Ockeghem Offline
Member

Registered: 08/09/18
Posts: 29
Loc: Virginia
Originally Posted By: Markyboard
Originally Posted By: wd8dky
FPGAs are so '90's, when I started designing them.


Yeah, I'm loving the recent marketing angle..."FPGA powered".
rolleyes facepalm


I still am waiting for the Kyra or Valkyrie or whatever Waldorf are planning to call it.
The demos had me wanting it more than a Moog One. Am I nuts?

Top
#2956825 - 11/07/18 11:16 AM Re: Hammond B3 clone [Re: Ockeghem]
mate stubb Offline
Grand Poobah of the Trebuchet
10k Club

Registered: 10/26/03
Posts: 16222
Are you nuts for waiting for an announced Waldorf synth?


Why yes. Yes, you are.
_________________________
Moe
---
Kawai Novus: "Please feel surprised even more."

http://www.hotrodmotm.com

Top
#2956878 - 11/07/18 08:52 PM Re: Hammond B3 clone [Re: mate stubb]
eric Offline
MP Hall of Fame Member

Registered: 01/25/02
Posts: 6358
Loc: Virginia
Nord Lead

Top
#2956879 - 11/07/18 09:29 PM Re: Hammond B3 clone [Re: Frank Montis]
davedoerfler Offline
KCFF League Champion 2017
MP Hall of Fame Member

Registered: 12/27/12
Posts: 7870
Loc: the swamp
Originally Posted By: Frank Montis
You may think it's ridiculous, but some people are still very happy with it.

I also am one who is still very happy with it (the origional dual manual Mojo). No plans to get anything else as of this writing. smile
_________________________
The lack of insight in musically interesting progress displayed in this thread is ugly and mind numbing.
TV
It's easy to make a bad sound. Sometimes you can make a great sound.
Trent Reznor

Top
#2956918 - 11/08/18 05:57 AM Re: Hammond B3 clone [Re: davedoerfler]
Al Quinn Offline
Platinum Member

Registered: 08/13/14
Posts: 1181
Loc: Center Moriches, NY
Originally Posted By: davedoerfler
Originally Posted By: Frank Montis
You may think it's ridiculous, but some people are still very happy with it.

I also am one who is still very happy with it (the origional dual manual Mojo). No plans to get anything else as of this writing. smile

Another happy dual manual Mojo owner here with no intention of getting anything else. When I find a good instrument I like to keep it for a long time, spare myself from the distraction of gear churn, and focus my efforts on becoming a better musician. My ‘62 A100 is old technology too but I plan on keeping that around as well smile
_________________________
https://soundcloud.com/al-quinn-2

Top
#2956937 - 11/08/18 08:09 AM Re: Hammond B3 clone [Re: eric]
gg22 Offline
Senior Member

Registered: 08/03/14
Posts: 122
Originally Posted By: eric
Nord Lead


This one doesn't have 9 pin Leslie connector.

Top
#2956946 - 11/08/18 08:48 AM Re: Hammond B3 clone [Re: gg22]
drawback Online   happy
MP Hall of Fame Member

Registered: 05/11/04
Posts: 3630
Loc: Victoria BC, Canada
Originally Posted By: gg22
Originally Posted By: eric
Nord Lead


This one doesn't have 9 pin Leslie connector.


wink laugh
_________________________
1977 KG-2C | SL88 Studio | Mojo61 + 61B | Mainstage | Ravenscroft VI / iOS | VTines | Canterbury | Korg PlugKey + Module |

Top
#2956968 - 11/08/18 01:24 PM Re: Hammond B3 clone [Re: eric]
sosho Offline
Senior Member

Registered: 05/02/08
Posts: 99
Loc: germany
Originally Posted By: eric
Nord Lead

really nice for synth

Top
#2957013 - 11/08/18 08:33 PM Re: Hammond B3 clone [Re: mate stubb]
Ockeghem Offline
Member

Registered: 08/09/18
Posts: 29
Loc: Virginia
Originally Posted By: mate stubb
Are you nuts for waiting for an announced Waldorf synth?


Why yes. Yes, you are.


Thank you. The only thing worse than being nuts is to be unsure about it.

Top
#2957015 - 11/08/18 09:22 PM Re: Hammond B3 clone [Re: Ockeghem]
davedoerfler Offline
KCFF League Champion 2017
MP Hall of Fame Member

Registered: 12/27/12
Posts: 7870
Loc: the swamp
Originally Posted By: Ockeghem
Originally Posted By: mate stubb
Are you nuts for waiting for an announced Waldorf synth?


Why yes. Yes, you are.


Thank you. The only thing worse than being nuts is to be unsure about it.


and to be discussing this on a Hammond B3 clone thread. hitt
_________________________
The lack of insight in musically interesting progress displayed in this thread is ugly and mind numbing.
TV
It's easy to make a bad sound. Sometimes you can make a great sound.
Trent Reznor

Top
Page 1 of 2 1 2 >


Moderator:  Dave Bryce, Stephen Fortner